1993 Isuzu Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Isuzu Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.1 mm |
| Offset (ET) | 38 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1993 Regular Cab — Year-Specific Fitment Context
The 1993 Isuzu Regular Cab is in year 2 of 4 using the 6x139.7 pattern (1992–1995). Wheels from any 1992–1995 Isuzu Regular Cab are cross-compatible with the 1993 model.
Isuzu Regular Cab Bolt Pattern by Year
The table below shows how the Regular Cab's wheel specifications have changed over the years. The 1993 model year is highlighted.
Fitment Notes
The 1993 Isuzu Regular Cab has a bolt pattern of 6x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".
This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Isuzu Regular Cab appears from 1992 to 1995 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
1993 Isuzu Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 1993 Isuzu Regular Cab?
The 1993 Isuzu Regular Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.1mm and the offset is 38mm.
What other years of Isuzu Regular Cab have the same bolt pattern as the 1993?
The Isuzu Regular Cab uses the 6x139.7 pattern from 1992 through 1995. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
What does 38mm offset mean for the 1993 Regular Cab?
An offset of 38mm means the wheel's mounting surface is 38mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Isuzu.
What is the center bore of a 1993 Isuzu Regular Cab?
The factory center bore (hub bore) for the 1993 Isuzu Regular Cab is 100.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 1993 Isuzu Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 1993 Isuzu Regular Cabs use lug bolts or lug nuts?
The 1993 Regular Cab requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Isuzu Regular Cab is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1995 (4 model years).
- Observed bolt-pattern variants: 1 (6x139.7).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1993 Isuzu Regular Cab, please report it via our About page contact so we can verify and update this record.