2022 Jeep Wagoneer Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Jeep Wagoneer, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 30-50mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
2022 Wagoneer — Year-Specific Fitment Context
The 2022 model year marks the beginning of the Jeep Wagoneer's 6x139.7 bolt pattern era, which continued through 2024 (3 consecutive years). Wheels from any 2022–2024 Jeep Wagoneer are cross-compatible with the 2022 model.
Jeep Wagoneer Bolt Pattern by Year
The table below shows how the Wagoneer's wheel specifications have changed over the years. The 2022 model year is highlighted.
Fitment Notes
The 2022 Jeep Wagoneer has a bolt pattern of 6x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".
This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Jeep Wagoneer appears from 2022 to 2024 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
2022 Jeep Wagoneer — Frequently Asked Questions
What is the bolt pattern for a 2022 Jeep Wagoneer?
The 2022 Jeep Wagoneer uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 30-50mmmm.
What other years of Jeep Wagoneer have the same bolt pattern as the 2022?
The Jeep Wagoneer uses the 6x139.7 pattern from 2022 through 2024. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2022 Jeep Wagoneer?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 30-50mmmm, and a center bore of at least 71.5mm (using hub rings if larger).
What is the PCD for a 2022 Jeep Wagoneer?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2022 Wagoneer, the PCD is 6x139.7.
What is the factory wheel offset for a 2022 Jeep Wagoneer?
The OEM offset for the 2022 Wagoneer is typically around 30-50mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2022 Jeep Wagoneer use?
The 2022 Jeep Wagoneer uses M14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Fitment Checklist Before You Buy Wheels
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Jeep Wagoneer is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2022-2024 (3 model years).
- Observed bolt-pattern variants: 1 (6x139.7).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2022 Jeep Wagoneer, please report it via our About page contact so we can verify and update this record.