2025 Lexus LC Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Lexus LC is 5x120. It has a center bore of 60.1 mm, an offset range of 20-30mm, and utilizes M14x1.5 (Flat/Mag seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).
2025 Lexus LC Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 20-30mm |
| Thread Size (Lug Nut / Bolt) | M14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 76 ft-lbs (103 Nm) |
2025 LC — Year-Specific Fitment Context
The 2025 Lexus LC is in year 8 of 9 using the 5x120 pattern (2018–2026). Wheels from any 2018–2026 Lexus LC are cross-compatible with the 2025 model.
Lexus LC Bolt Pattern by Year
Looking for all generations? View the complete Lexus LC (2018–2026) Bolt Pattern & Generation Guide →
The table below shows how the LC's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Lexus LC Wheel Interchange & Donor Fitment Guide (5x120)
The 5x120 bolt pattern is shared by 641 vehicles in our database (common). For safe wheel swaps on the 2025 Lexus LC, donor rims must match the 5x120 PCD and have a center bore of at least 60.1 mm:
DIRECT HUB MATCH Same 5x120 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2006 Lexus LS | 60.1 mm (Exact) | 35 | N 14x1.50 (Flat/Mag) |
| 2025 Lexus TX | 60.1 mm (Exact) | 30-40mm | M14x1.5 (Flat/Mag) |
HUB RING FITMENT Same 5x120 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Lucid Air | 64.1 mm | 64.1mm → 60.1mm |
35-45 |
| 2025 Lucid Gravity | 72.5 mm | 72.5mm → 60.1mm |
40 |
| 2016 MINI Paceman | 72.6 mm | 72.6mm → 60.1mm |
49 |
| 2019 Rolls-Royce Phantom | 72.6 mm | 72.6mm → 60.1mm |
25 |
| 2025 Tesla Model S | 64.1 mm | 64.1mm → 60.1mm |
35-40 |
| 2025 Tesla Model X | 64.1 mm | 64.1mm → 60.1mm |
35-45 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 76 ft-lbs (103 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Lexus LC — Frequently Asked Questions
What is the bolt pattern for a 2025 Lexus LC?
The 2025 Lexus LC uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 20-30mmmm.
What other years of Lexus LC have the same bolt pattern as the 2025?
The Lexus LC uses the 5x120 pattern from 2018 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What does 20-30mmmm offset mean for the 2025 LC?
An offset of 20-30mmmm means the wheel's mounting surface is 20-30mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Lexus.
What is the center bore of a 2025 Lexus LC?
The factory center bore (hub bore) for the 2025 Lexus LC is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2025 Lexus LCs use lug bolts or lug nuts?
The 2025 LC requires M14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2025 Lexus LC use?
The 2025 Lexus LC uses M14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →