2024 Maserati Grecale Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Maserati Grecale, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 Grecale — Year-Specific Fitment Context
The 2024 model year is the final year of the Maserati Grecale's 5x114.3 bolt pattern run (since 2023). Wheels from any 2023–2024 Maserati Grecale are cross-compatible with the 2024 model.
Maserati Grecale Bolt Pattern by Year
The table below shows how the Grecale's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2023 | 5x114.3 | 67.1 | 45 |
| ▸ 2024 | 5x114.3 | 67.1 | 45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Maserati Grecale
For the 2024 Maserati Grecale, the bolt pattern is 5x114.3 with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive; stock is 45mm, and deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.5) and seat type—use conical (60-degree) or ball-seat nuts as specified. Never use incorrect lug nuts; they can loosen or damage the wheel. This is the final year for this bolt pattern, so 2023–2024 Grecale wheels are cross-compatible.
Historical Fitment Data Reference
In our dataset, Maserati Grecale appears from 2023 to 2024 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 67.1mm bore is essential for centering.
- ✅ Check inner clearance for offset changes; a 45mm offset is optimal, but lower offsets may require fender rolling.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Maserati Grecale — Frequently Asked Questions
What is the bolt pattern for a 2024 Maserati Grecale?
The 2024 Maserati Grecale uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.
What other years of Maserati Grecale have the same bolt pattern as the 2024?
The Maserati Grecale uses the 5x114.3 pattern from 2023 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2024 Maserati?
The 2024 Grecale uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2024 Maserati Grecale use?
The 2024 Maserati Grecale uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2024 Maserati Grecale?
The OEM offset for the 2024 Grecale is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2024 Maserati Grecale?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset