2007 Maybach 57 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Maybach 57, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-40mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
2007 57 — Year-Specific Fitment Context
The 2007 Maybach 57 is in year 3 of 8 using the 5x112 pattern (2005–2012). Wheels from any 2005–2012 Maybach 57 are cross-compatible with the 2007 model.
Maybach 57 Bolt Pattern by Year
The table below shows how the 57's wheel specifications have changed over the years. The 2007 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2007 Maybach 57
For your 2007 Maybach 57, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels must be hub-centric; use hub-centric rings to avoid vibration and stress on lug bolts. Offset must stay within 30-40mm to prevent rubbing or clearance issues with the suspension and brakes. Always use M14x1.5 lug nuts with the correct seat type (cone or ball) matching the wheel. Improper seating can cause wheel loosening. Verify load rating meets Maybach specifications for safety.
Historical Fitment Data Reference
In our dataset, Maybach 57 appears from 2005 to 2012 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 70.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub rings; they can cause vibration and damage.
- ✅ Check brake caliper clearance when fitting aftermarket wheels, especially with lower offsets.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Maybach 57 — Frequently Asked Questions
What is the bolt pattern for a 2007 Maybach 57?
The 2007 Maybach 57 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-40mmmm.
What other years of Maybach 57 have the same bolt pattern as the 2007?
The Maybach 57 uses the 5x112 pattern from 2005 through 2012. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What is the center bore of a 2007 Maybach 57?
The factory center bore (hub bore) for the 2007 Maybach 57 is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2007 Maybach 57?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your M14x1.5 hardware.
How tight should I torque the lug nuts on a 2007 Maybach 57?
Refer to your owner's manual for exact specs, but always tighten the M14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2007 Maybach 57?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-40mmmm, and a center bore of at least 66.6mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset