2007 Mercedes-Benz G-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Mercedes-Benz G-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 84.1 mm |
| Offset (ET) | 63 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2007 G-Class — Year-Specific Fitment Context
The 2007 Mercedes-Benz G-Class is in year 6 of 23 using the 5x130 pattern (2002–2024). Wheels from any 2002–2024 Mercedes-Benz G-Class are cross-compatible with the 2007 model.
Mercedes-Benz G-Class Bolt Pattern by Year
The table below shows how the G-Class's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2002 | 5x130 | 84.1 | 63 |
| 2003 | 5x130 | 84.1 | 63 |
| 2004 | 5x130 | 84.1 | 63 |
| 2005 | 5x130 | 84.1 | 63 |
| 2006 | 5x130 | 84.1 | 63 |
| ▸ 2007 | 5x130 | 84.1 | 63 |
| 2008 | 5x130 | 84.1 | 63 |
| 2009 | 5x130 | 84.1 | 63 |
| 2010 | 5x130 | 84.1 | 63 |
| 2011 | 5x130 | 84.1 | 63 |
| 2012 | 5x130 | 84.1 | 63 |
| 2013 | 5x130 | 84.1 | 63 |
| 2014 | 5x130 | 84.1 | 63 |
| 2015 | 5x130 | 84.1 | 63 |
| 2016 | 5x130 | 84.1 | 63 |
| 2017 | 5x130 | 84.1 | 63 |
| 2018 | 5x130 | 84.1 | 63 |
| 2019 | 5x130 | 84.1 | 20-50 |
| 2020 | 5x130 | 84.1 | 20-50 |
| 2021 | 5x130 | 84.1 | 20-50 |
| 2022 | 5x130 | 84.1 | 20-50 |
| 2024 | 5x130 | 84.1 | 20-50 |
5x130 Pattern Context
This bolt pattern appears on 208 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x130:
Expert Buying Guide for 2007 Mercedes-Benz G-Class
For your 2007 Mercedes-Benz G-Class, the correct bolt pattern is 5x130 with a center bore of 84.1mm. When selecting aftermarket wheels, ensure they have a center bore of at least 84.1mm or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 63mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—Mercedes typically uses ball seats, but aftermarket wheels may require conical or shank-style nuts. Improper lug nut selection can lead to wheel loosening. Verify compatibility with 2002–2024 G-Class models for direct fitment.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz G-Class appears from 2002 to 2024 (22 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 113.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 84.1mm without hub-centric rings; vibration and stress on studs may occur.
- ✅ Check offset carefully: lower offset (e.g., 50mm) may cause tire rub on fenders, while higher offset (e.g., 70mm) may contact suspension components.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Mercedes-Benz G-Class — Frequently Asked Questions
What is the bolt pattern for a 2007 Mercedes-Benz G-Class?
The 2007 Mercedes-Benz G-Class uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 84.1mm and the offset is 63mm.
What other years of Mercedes-Benz G-Class have the same bolt pattern as the 2007?
The Mercedes-Benz G-Class uses the 5x130 pattern from 2002 through 2024. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What does 63mm offset mean for the 2007 G-Class?
An offset of 63mm means the wheel's mounting surface is 63mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercedes-Benz.
What is the PCD for a 2007 Mercedes-Benz G-Class?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 G-Class, the PCD is 5x130.
Can I use spacers on my 2007 Mercedes-Benz G-Class?
Yes, but ensure the wheel spacers match the 5x130 bolt pattern and 84.1mm center bore. Also verify that you have enough thread engagement for your B 14x1.50 hardware.
Will wheels from another Mercedes-Benz fit my 2007 G-Class?
Only if they share the exact same 5x130 bolt pattern, a compatible offset, and a center bore equal to or larger than 84.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset