2024 Mercedes-Benz Mercedes-Maybach S-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Mercedes-Benz Mercedes-Maybach S-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2024 Mercedes-Maybach S-Class — Year-Specific Fitment Context
The 2024 model year is the final year of the Mercedes-Benz Mercedes-Maybach S-Class's 5x112 bolt pattern run (since 2017). Wheels from any 2017–2024 Mercedes-Benz Mercedes-Maybach S-Class are cross-compatible with the 2024 model.
Mercedes-Benz Mercedes-Maybach S-Class Bolt Pattern by Year
The table below shows how the Mercedes-Maybach S-Class's wheel specifications have changed over the years. The 2024 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2024 Mercedes-Benz Mercedes-Maybach S-Class
For the 2024 Mercedes-Maybach S-Class, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels must use hub-centric rings to avoid vibration and ensure proper load transfer. The offset range is tight (30-50mm); straying outside can cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.5) and seat type—factory uses ball seats; aftermarket wheels often require conical (60-degree) seats. Never mix seat types. Re-torque after 50-100 miles. Wheels from 2017-2024 S-Class models are direct fit.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Mercedes-Maybach S-Class appears from 2017 to 2024 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 94.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings for aftermarket wheels to match the 66.6mm center bore.
- ✅ Stick to offset between 30-50mm; lower offsets may rub fenders, higher may contact suspension.
- ✅ Re-torque lug nuts to 110-130 Nm after 50-100 miles; use a torque wrench to avoid over-tightening.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Mercedes-Benz Mercedes-Maybach S-Class — Frequently Asked Questions
What is the bolt pattern for a 2024 Mercedes-Benz Mercedes-Maybach S-Class?
The 2024 Mercedes-Benz Mercedes-Maybach S-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Mercedes-Maybach S-Class have the same bolt pattern as the 2024?
The Mercedes-Benz Mercedes-Maybach S-Class uses the 5x112 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Do 2024 Mercedes-Benz Mercedes-Maybach S-Classs use lug bolts or lug nuts?
The 2024 Mercedes-Maybach S-Class requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2024 Mercedes-Benz Mercedes-Maybach S-Class?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 30-50mm offset mean for the 2024 Mercedes-Maybach S-Class?
An offset of 30-50mm means the wheel's mounting surface is 30-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercedes-Benz.
What is the PCD for a 2024 Mercedes-Benz Mercedes-Maybach S-Class?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Mercedes-Maybach S-Class, the PCD is 5x112.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset