2018 Mercedes-Benz Metris WORKER Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Mercedes-Benz Metris WORKER Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2018 Metris WORKER Cargo — Year-Specific Fitment Context
The 2018 Mercedes-Benz Metris WORKER Cargo is in year 2 of 4 using the 5x112 pattern (2017–2020). Wheels from any 2017–2020 Mercedes-Benz Metris WORKER Cargo are cross-compatible with the 2018 model.
Mercedes-Benz Metris WORKER Cargo Bolt Pattern by Year
The table below shows how the Metris WORKER Cargo's wheel specifications have changed over the years. The 2018 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2018 Mercedes-Benz Metris WORKER Cargo
For the 2018 Mercedes-Benz Metris WORKER Cargo, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels require hub-centric rings to avoid vibration and ensure proper load distribution. Offset must stay within 30-50mm; deviations risk rubbing or suspension interference. Always use 14x1.5 lug nuts with the correct seat type—factory wheels use ball seat, while aftermarket may require conical (60-degree) or ball seat. Verify compatibility to prevent wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Metris WORKER Cargo appears from 2017 to 2020 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 110-120 ft-lbs after 50-100 miles of driving.
- ✅ Use hub-centric rings (66.6mm ID to aftermarket hub OD) to prevent vibrations.
- ✅ Confirm wheel seat type: factory ball seat vs. aftermarket conical seat; mismatched seats cause loose wheels.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Mercedes-Benz Metris WORKER Cargo — Frequently Asked Questions
What is the bolt pattern for a 2018 Mercedes-Benz Metris WORKER Cargo?
The 2018 Mercedes-Benz Metris WORKER Cargo uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Metris WORKER Cargo have the same bolt pattern as the 2018?
The Mercedes-Benz Metris WORKER Cargo uses the 5x112 pattern from 2017 through 2020. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What is the factory wheel offset for a 2018 Mercedes-Benz Metris WORKER Cargo?
The OEM offset for the 2018 Metris WORKER Cargo is typically around 30-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2018 Mercedes-Benz?
The 2018 Metris WORKER Cargo uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2018 Mercedes-Benz Metris WORKER Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 Metris WORKER Cargo, the PCD is 5x112.
What lug nut size does the 2018 Mercedes-Benz Metris WORKER Cargo use?
The 2018 Mercedes-Benz Metris WORKER Cargo uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset