2019 Mercedes-Benz SLC Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Mercedes-Benz SLC, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 SLC — Year-Specific Fitment Context
The 2019 Mercedes-Benz SLC is in year 3 of 4 using the 5x112 pattern (2017–2020). Wheels from any 2017–2020 Mercedes-Benz SLC are cross-compatible with the 2019 model.
Mercedes-Benz SLC Bolt Pattern by Year
The table below shows how the SLC's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2019 Mercedes-Benz SLC
For your 2019 Mercedes-Benz SLC, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels must be hub-centric; use hub-centric rings to avoid vibrations. Offset range is 30-50mm; staying within 35-45mm ensures proper clearance and handling. Always use 14x1.5 lug nuts with the correct seat type—Mercedes typically uses ball seats, but verify. Mixing seat types can cause wheel loosening. Safety first: improper fitment compromises braking and steering.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz SLC appears from 2017 to 2020 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 91.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles to ensure proper seating.
- ✅ Avoid wheels with offset below 30mm to prevent fender rubbing.
- ✅ Check for TPMS sensor compatibility; aftermarket wheels may require new sensors.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Mercedes-Benz SLC — Frequently Asked Questions
What is the bolt pattern for a 2019 Mercedes-Benz SLC?
The 2019 Mercedes-Benz SLC uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz SLC have the same bolt pattern as the 2019?
The Mercedes-Benz SLC uses the 5x112 pattern from 2017 through 2020. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What is the center bore of a 2019 Mercedes-Benz SLC?
The factory center bore (hub bore) for the 2019 Mercedes-Benz SLC is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Mercedes-Benz fit my 2019 SLC?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Why is matching the 66.6mm center bore important for the 2019 SLC?
The 66.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2019 Mercedes-Benz SLC?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset