2020 Mercedes-Benz Sprinter 1500 Passenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Mercedes-Benz Sprinter 1500 Passenger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 Sprinter 1500 Passenger — Year-Specific Fitment Context
The 2020 Mercedes-Benz Sprinter 1500 Passenger is in year 2 of 4 using the 5x112 pattern (2019–2022). Wheels from any 2019–2022 Mercedes-Benz Sprinter 1500 Passenger are cross-compatible with the 2020 model.
Mercedes-Benz Sprinter 1500 Passenger Bolt Pattern by Year
The table below shows how the Sprinter 1500 Passenger's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2020 Mercedes-Benz Sprinter 1500 Passenger
For your 2020 Mercedes-Benz Sprinter 1500 Passenger, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels often have a larger center bore; use hub-centric rings to prevent vibrations and ensure proper load distribution. Offset must stay within 30-50mm; deviations risk rubbing or suspension interference. Always use 14x1.5 lug nuts with the correct seat type—cone or ball seat—matching the wheel's design. Improper seating can cause wheel loosening. Verify lug nut torque to manufacturer specs and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Sprinter 1500 Passenger appears from 2019 to 2022 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 130-140 Nm after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 30mm; they may rub the fenders or suspension.
- ✅ If using aftermarket wheels, confirm they are hub-centric or use 66.6mm hub rings to prevent vibration.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Mercedes-Benz Sprinter 1500 Passenger — Frequently Asked Questions
What is the bolt pattern for a 2020 Mercedes-Benz Sprinter 1500 Passenger?
The 2020 Mercedes-Benz Sprinter 1500 Passenger uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Sprinter 1500 Passenger have the same bolt pattern as the 2020?
The Mercedes-Benz Sprinter 1500 Passenger uses the 5x112 pattern from 2019 through 2022. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
What does 30-50mm offset mean for the 2020 Sprinter 1500 Passenger?
An offset of 30-50mm means the wheel's mounting surface is 30-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercedes-Benz.
What lug nut size does the 2020 Mercedes-Benz Sprinter 1500 Passenger use?
The 2020 Mercedes-Benz Sprinter 1500 Passenger uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2020 Mercedes-Benz?
The 2020 Sprinter 1500 Passenger uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2020 Mercedes-Benz Sprinter 1500 Passenger?
The OEM offset for the 2020 Sprinter 1500 Passenger is typically around 30-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset