2001 Mitsubishi Montero Sport Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Mitsubishi Montero Sport, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 108.0 mm |
| Offset (ET) | 23 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2001 Montero Sport — Year-Specific Fitment Context
The 2001 Mitsubishi Montero Sport is in year 5 of 8 using the 6x139.7 pattern (1997–2004). Wheels from any 1997–2004 Mitsubishi Montero Sport are cross-compatible with the 2001 model.
Mitsubishi Montero Sport Bolt Pattern by Year
The table below shows how the Montero Sport's wheel specifications have changed over the years. The 2001 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2001 Mitsubishi Montero Sport
For your 2001 Mitsubishi Montero Sport, the 6x139.7 bolt pattern is shared with 1997–2004 models. The 108.0mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stock is 23mm. Sticking within ±5mm is safe; deviations may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use a conical (60-degree) seat. Never mix seat types; improper seating can lead to wheel loss. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Mitsubishi Montero Sport appears from 1997 to 2004 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80–90 ft-lbs after 50–100 miles of driving.
- ✅ If using aftermarket wheels, verify hub bore and use hub-centric rings if needed.
- ✅ Check offset carefully; +23mm is stock. Going lower offset may cause rubbing on fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Mitsubishi Montero Sport — Frequently Asked Questions
What is the bolt pattern for a 2001 Mitsubishi Montero Sport?
The 2001 Mitsubishi Montero Sport uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 108.0mm and the offset is 23mm.
What other years of Mitsubishi Montero Sport have the same bolt pattern as the 2001?
The Mitsubishi Montero Sport uses the 6x139.7 pattern from 1997 through 2004. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What is the factory wheel offset for a 2001 Mitsubishi Montero Sport?
The OEM offset for the 2001 Montero Sport is typically around 23mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2001 Mitsubishi?
The 2001 Montero Sport uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2001 Mitsubishi Montero Sport?
The factory center bore (hub bore) for the 2001 Mitsubishi Montero Sport is 108.0mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 108.0mm center bore important for the 2001 Montero Sport?
The 108.0mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset