2000 Nissan Frontier Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Nissan Frontier Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 100.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2000 Frontier Regular Cab — Year-Specific Fitment Context
The 2000 Nissan Frontier Regular Cab is in year 3 of 4 using the 6x139.7 pattern (1998–2001). Wheels from any 1998–2001 Nissan Frontier Regular Cab are cross-compatible with the 2000 model.
Nissan Frontier Regular Cab Bolt Pattern by Year
The table below shows how the Frontier Regular Cab's wheel specifications have changed over the years. The 2000 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2000 Nissan Frontier Regular Cab
For your 2000 Nissan Frontier Regular Cab, the 6x139.7 bolt pattern is shared with 1998–2001 models, ensuring cross-compatibility. The 100.1mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive: the factory 30mm offset maintains suspension geometry and tire clearance. Deviating more than ±10mm may cause rubbing or handling issues. Always use the correct 12x1.25 lug nuts with the proper seat type (cone or ball) to avoid wheel loosening. Never use incorrect thread pitch or seat type, as this can lead to catastrophic failure.
Historical Fitment Data Reference
In our dataset, Nissan Frontier Regular Cab appears from 1998 to 2001 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 100.1mm; outer diameter must match wheel bore.
- ✅ Avoid spacers unless hub-centric; they can alter offset and stress wheel bearings.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Nissan Frontier Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2000 Nissan Frontier Regular Cab?
The 2000 Nissan Frontier Regular Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.1mm and the offset is 30mm.
What other years of Nissan Frontier Regular Cab have the same bolt pattern as the 2000?
The Nissan Frontier Regular Cab uses the 6x139.7 pattern from 1998 through 2001. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Will wheels from another Nissan fit my 2000 Frontier Regular Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 100.1mm.
What does 30mm offset mean for the 2000 Frontier Regular Cab?
An offset of 30mm means the wheel's mounting surface is 30mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
What is the factory wheel offset for a 2000 Nissan Frontier Regular Cab?
The OEM offset for the 2000 Frontier Regular Cab is typically around 30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2000 Nissan?
The 2000 Frontier Regular Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset