2024 Nissan Titan Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Nissan Titan is 6x139.7 (6x5.5"). It has a center bore of 78.1 mm, an offset range of 25-35, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 98 ft-lbs (133 Nm).
2024 Nissan Titan Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Center Bore (Hub Bore) | 78.1 mm |
| Offset Range (ET) | 25-35 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 98 ft-lbs (133 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2024 Titan — Year-Specific Fitment Context
The 2024 is the only model year of the Nissan Titan in our database using the 6x139.7 bolt pattern.
2024 Nissan Titan Wheel Interchange & Donor Fitment Guide (6x139.7)
The 6x139.7 bolt pattern is shared by 1102 vehicles in our database (common). For safe wheel swaps on the 2024 Nissan Titan, donor rims must match the 6x139.7 PCD and have a center bore of at least 78.1 mm:
DIRECT HUB MATCH Same 6x139.7 Pattern & Exact 78.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Cadillac Escalade | 78.1 mm (Exact) | 24-31 | 14x1.5 (Flat) |
| 2025 Cadillac Escalade ESV | 78.1 mm (Exact) | 24-31 | 14x1.5 (Flat) |
| 2003 Chevrolet Astro Cargo | 78.1 mm (Exact) | 30 | 14x1.5 (Cone) |
| 2003 Chevrolet Astro Passenger | 78.1 mm (Exact) | 30 | 14x1.5 (Cone) |
| 2025 Chevrolet BrightDrop | 78.1 mm (Exact) | Not Applicable | 14x1.5 (Flat) |
| 2025 Chevrolet Colorado | 78.1 mm (Exact) | 33 | 14x1.5 (Flat) |
HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2022 Toyota Tundra CrewMax | 95.1 mm | 95.1mm → 78.1mm |
60 |
| 2022 Toyota Tundra Double Cab | 95.1 mm | 95.1mm → 78.1mm |
60 |
| 2024 Toyota Tundra Hybrid CrewMax | 95.1 mm | 95.1mm → 78.1mm |
60 |
| 2021 Ford Bronco | 93.1 mm | 93.1mm → 78.1mm |
55 |
| 2025 Ford Ranger | 93.1 mm | 93.1mm → 78.1mm |
55 |
| 2019 Ford Ranger SuperCab | 93.1 mm | 93.1mm → 78.1mm |
55 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 98 ft-lbs (133 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Nissan Titan — Frequently Asked Questions
What is the bolt pattern for a 2024 Nissan Titan?
The 2024 Nissan Titan uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 25-35mm.
What is the factory wheel offset for a 2024 Nissan Titan?
The OEM offset for the 2024 Titan is typically around 25-35mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2024 Nissan Titan?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2024 Nissan Titan use?
The 2024 Nissan Titan uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2024 Nissan Titan?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 78.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Will wheels from another Nissan fit my 2024 Titan?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 78.1mm.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →