1992 Plymouth Sundance Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Plymouth Sundance, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1992 Sundance — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Plymouth Sundance's 5x100 bolt pattern era, which continued through 1994 (3 consecutive years). Wheels from any 1992–1994 Plymouth Sundance are cross-compatible with the 1992 model.
Plymouth Sundance Bolt Pattern by Year
The table below shows how the Sundance's wheel specifications have changed over the years. The 1992 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 1992 Plymouth Sundance
For your 1992 Plymouth Sundance, the bolt pattern is 5x100 with a critical center bore of 57.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings (57.1mm ID to your wheel's bore) are mandatory to prevent vibration and ensure proper load transfer. The offset range is 35-45mm; deviating outside this can cause rubbing or clearance issues. Always use lug nuts with the correct M12x1.5 thread pitch and a 60-degree conical seat (common for aftermarket wheels) or the factory ball seat. Never mix seat types—this leads to loose wheels and potential failure. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Plymouth Sundance appears from 1992 to 1994 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring fitment; loose rings can cause vibrations.
- ✅ Check for caliper clearance with wheels over 15 inches; some 16-inch designs may require spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Plymouth Sundance — Frequently Asked Questions
What is the bolt pattern for a 1992 Plymouth Sundance?
The 1992 Plymouth Sundance uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 35-45mmmm.
What other years of Plymouth Sundance have the same bolt pattern as the 1992?
The Plymouth Sundance uses the 5x100 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1992 Plymouth?
The 1992 Sundance uses a 5x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 57.1mm center bore important for the 1992 Sundance?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 1992 Plymouth Sundance?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 1992 Plymouth Sundance use?
The 1992 Plymouth Sundance uses M12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset