2001 Pontiac Sunfire Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Pontiac Sunfire, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2001 Sunfire — Year-Specific Fitment Context
The 2001 Pontiac Sunfire is in year 7 of 11 using the 5x100 pattern (1995–2005). Wheels from any 1995–2005 Pontiac Sunfire are cross-compatible with the 2001 model.
Pontiac Sunfire Bolt Pattern by Year
The table below shows how the Sunfire's wheel specifications have changed over the years. The 2001 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2001 Pontiac Sunfire
For your 2001 Pontiac Sunfire, the 5x100 bolt pattern and 57.1mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The ideal offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—conical (60-degree) for most aftermarket wheels, or ball seat for factory wheels. Improper lug nuts can lead to wheel loss. Verify wheel width and tire size compatibility to avoid suspension or brake interference.
Historical Fitment Data Reference
In our dataset, Pontiac Sunfire appears from 1995 to 2005 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations.
- ✅ Check for clearance with the strut and fender when using lower offset wheels (e.g., 35mm).
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Pontiac Sunfire — Frequently Asked Questions
What is the bolt pattern for a 2001 Pontiac Sunfire?
The 2001 Pontiac Sunfire uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 45mm.
What other years of Pontiac Sunfire have the same bolt pattern as the 2001?
The Pontiac Sunfire uses the 5x100 pattern from 1995 through 2005. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
Will wheels from another Pontiac fit my 2001 Sunfire?
Only if they share the exact same 5x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
What is the PCD for a 2001 Pontiac Sunfire?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2001 Sunfire, the PCD is 5x100.
What does 45mm offset mean for the 2001 Sunfire?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Pontiac.
Why is matching the 57.1mm center bore important for the 2001 Sunfire?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset