2012 Ram C/V Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Ram C/V, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2012 C/V — Year-Specific Fitment Context
The 2012 is the only model year of the Ram C/V in our database using the 5x127 bolt pattern.
Fitment Notes
The 2012 Ram C/V has a bolt pattern of 5x127.
Imperial Conversion: This bolt pattern is commonly referred to as 5x5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5".
This means it is a 5 lug pattern with a circle diameter of 127mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ram C/V appears from 2012 to 2012 (1 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
5x127 Pattern Context
This bolt pattern appears on 236 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
2012 Ram C/V — Frequently Asked Questions
What is the bolt pattern for a 2012 Ram C/V?
The 2012 Ram C/V uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 35-45mmmm.
Can I use spacers on my 2012 Ram C/V?
Yes, but ensure the wheel spacers match the 5x127 bolt pattern and 71.5mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
How tight should I torque the lug nuts on a 2012 Ram C/V?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Ram fit my 2012 C/V?
Only if they share the exact same 5x127 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.5mm.
What is the PCD for a 2012 Ram C/V?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2012 C/V, the PCD is 5x127.
What is the factory wheel offset for a 2012 Ram C/V?
The OEM offset for the 2012 C/V is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ram C/V is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2012-2012 (1 model years).
- Observed bolt-pattern variants: 1 (5x127).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2012 Ram C/V, please report it via our About page contact so we can verify and update this record.