1994 Cadillac Fleetwood Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Cadillac Fleetwood, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 78.3 mm |
| Offset (ET) | 12 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x127 is commonly referred to as 5x5" in US Standard.
1994 Fleetwood — Year-Specific Fitment Context
The 1994 model year marks the beginning of the Cadillac Fleetwood's 5x127 bolt pattern era, which continued through 1996 (3 consecutive years). Wheels from any 1994–1996 Cadillac Fleetwood are cross-compatible with the 1994 model. Note: the 1993 model used a different pattern (5x115), so its wheels are NOT interchangeable with the 1994. Across its full production run (1992–1996), the Fleetwood has also used: 5x115.
Cadillac Fleetwood Bolt Pattern by Year
The table below shows how the Fleetwood's wheel specifications have changed over the years. The 1994 model year is highlighted.
5x127 Pattern Context
This bolt pattern appears on 236 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
Expert Buying Guide for 1994 Cadillac Fleetwood
For your 1994 Cadillac Fleetwood, the bolt pattern is 5x127 with a center bore of 78.3mm. When selecting aftermarket wheels, ensure they are hub-centric or use hub-centric rings to avoid vibrations. The offset is sensitive; stock is 12mm, but a range of 0-20mm may fit with careful checking. Always verify lug nut thread pitch (12x1.50) and seat type (conical/ball seat) to prevent loosening. Wheels from 1994-1996 Fleetwoods are direct swaps, but avoid 1993 models (5x115). Safety first: improper fitment can lead to wheel separation.
Historical Fitment Data Reference
In our dataset, Cadillac Fleetwood appears from 1992 to 1996 (5 model years). Across model years, this model appears with 2 bolt patterns (5x115, 5x127).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 35.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Check for caliper clearance when using wheels with offset below 10mm; spacers may be needed.
- ✅ Avoid using wheels from 1993 Fleetwood (5x115) as they will not fit without adapters.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Cadillac Fleetwood — Frequently Asked Questions
What is the bolt pattern for a 1994 Cadillac Fleetwood?
The 1994 Cadillac Fleetwood uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 78.3mm and the offset is 12mm.
What other years of Cadillac Fleetwood have the same bolt pattern as the 1994?
The Cadillac Fleetwood uses the 5x127 pattern from 1994 through 1996. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
Can I use 1993 Cadillac Fleetwood wheels on a 1994?
No. The 1993 Fleetwood used a 5x115 bolt pattern, which differs from the 1994's 5x127. They are not interchangeable.
Can I put aftermarket wheels on my 1994 Cadillac Fleetwood?
Absolutely. Just ensure the aftermarket wheels have a 5x127 bolt pattern, an offset near 12mm, and a center bore of at least 78.3mm (using hub rings if larger).
What is the factory wheel offset for a 1994 Cadillac Fleetwood?
The OEM offset for the 1994 Fleetwood is typically around 12mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 1994 Cadillac Fleetwood?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1994 Fleetwood, the PCD is 5x127.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset