1996 Cadillac Fleetwood Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Cadillac Fleetwood, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 78.3 mm |
| Offset (ET) | 12 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x127 is commonly referred to as 5x5" in US Standard.
1996 Fleetwood — Year-Specific Fitment Context
The 1996 model year is the final year of the Cadillac Fleetwood's 5x127 bolt pattern run (since 1994). Wheels from any 1994–1996 Cadillac Fleetwood are cross-compatible with the 1996 model. Across its full production run (1992–1996), the Fleetwood has also used: 5x115.
Cadillac Fleetwood Bolt Pattern by Year
The table below shows how the Fleetwood's wheel specifications have changed over the years. The 1996 model year is highlighted.
5x127 Pattern Context
This bolt pattern appears on 236 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
Expert Buying Guide for 1996 Cadillac Fleetwood
When selecting wheels for your 1996 Cadillac Fleetwood, the 5x127 bolt pattern is critical, but the 78.3mm center bore is equally important. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive; the factory spec is 12mm, but a range of 0-25mm is acceptable depending on tire width and suspension. Always use the correct lug nuts: 12x1.50 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts can cause wheel separation. For safety, re-torque after 50-100 miles and avoid mixing steel and aluminum wheels without proper hardware.
Historical Fitment Data Reference
In our dataset, Cadillac Fleetwood appears from 1992 to 1996 (5 model years). Across model years, this model appears with 2 bolt patterns (5x115, 5x127).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 35.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 78.3mm center bore.
- ✅ Avoid wheels with offset less than 0mm or greater than 25mm to prevent rubbing or bearing damage.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1996 Cadillac Fleetwood — Frequently Asked Questions
What is the bolt pattern for a 1996 Cadillac Fleetwood?
The 1996 Cadillac Fleetwood uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 78.3mm and the offset is 12mm.
What other years of Cadillac Fleetwood have the same bolt pattern as the 1996?
The Cadillac Fleetwood uses the 5x127 pattern from 1994 through 1996. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
What is the factory wheel offset for a 1996 Cadillac Fleetwood?
The OEM offset for the 1996 Fleetwood is typically around 12mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Cadillac fit my 1996 Fleetwood?
Only if they share the exact same 5x127 bolt pattern, a compatible offset, and a center bore equal to or larger than 78.3mm.
What does 12mm offset mean for the 1996 Fleetwood?
An offset of 12mm means the wheel's mounting surface is 12mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Cadillac.
What lug nut size does the 1996 Cadillac Fleetwood use?
The 1996 Cadillac Fleetwood uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset