2026 Ram ProMaster 2500 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Ram ProMaster 2500 is 5x130. It has a center bore of 78.1 mm, an offset range of 50-60, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2026 Ram ProMaster 2500 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Center Bore (Hub Bore) | 78.1 mm |
| Offset Range (ET) | 50-60 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
2026 ProMaster 2500 — Year-Specific Fitment Context
The 2026 model year is the final year of the Ram ProMaster 2500's 5x130 bolt pattern run (since 2024). Wheels from any 2024–2026 Ram ProMaster 2500 are cross-compatible with the 2026 model.
Ram ProMaster 2500 Bolt Pattern by Year
Looking for all generations? View the complete Ram ProMaster 2500 (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the ProMaster 2500's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Ram ProMaster 2500 Wheel Interchange & Donor Fitment Guide (5x130)
The 5x130 bolt pattern is shared by 239 vehicles in our database (moderately common). For safe wheel swaps on the 2026 Ram ProMaster 2500, donor rims must match the 5x130 PCD and have a center bore of at least 78.1 mm:
DIRECT HUB MATCH Same 5x130 Pattern & Exact 78.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Ram ProMaster 1500 | 78.1 mm (Exact) | 50-55 | 14x1.5 (Flat) |
| 2025 Ram ProMaster 3500 | 78.1 mm (Exact) | 50-55 | 14x1.5 (Flat) |
| 2024 Ram ProMaster Cargo Van | 78.1 mm (Exact) | 60 | 14x1.5 (Cone) |
| 2024 Ram ProMaster Window Van | 78.1 mm (Exact) | 60 | 14x1.5 (Cone) |
HUB RING FITMENT Same 5x130 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2021 Mercedes-Benz Mercedes-AMG G-Class | 84.1 mm | 84.1mm → 78.1mm |
20-50 |
| 2024 Mercedes-Benz G-Class | 84.1 mm | 84.1mm → 78.1mm |
20-50 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Ram ProMaster 2500 — Frequently Asked Questions
What is the bolt pattern for a 2026 Ram ProMaster 2500?
The 2026 Ram ProMaster 2500 uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 50-60mm.
What other years of Ram ProMaster 2500 have the same bolt pattern as the 2026?
The Ram ProMaster 2500 uses the 5x130 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2026 Ram?
The 2026 ProMaster 2500 uses a 5x130 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2026 Ram ProMaster 2500?
The factory center bore (hub bore) for the 2026 Ram ProMaster 2500 is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Ram fit my 2026 ProMaster 2500?
Only if they share the exact same 5x130 bolt pattern, a compatible offset, and a center bore equal to or larger than 78.1mm.
What is the factory wheel offset for a 2026 Ram ProMaster 2500?
The OEM offset for the 2026 ProMaster 2500 is typically around 50-60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →