2024 Ram ProMaster 3500 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Ram ProMaster 3500, along with offset and center bore data.
2024 Ram ProMaster 3500 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 50-55 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2024 ProMaster 3500 — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Ram ProMaster 3500's 5x130 bolt pattern era, which continued through 2025 (2 consecutive years). Wheels from any 2024–2025 Ram ProMaster 3500 are cross-compatible with the 2024 model.
Ram ProMaster 3500 Bolt Pattern by Year
The table below shows how the ProMaster 3500's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2024 | 5x130 | 78.1 | 50-55 |
| 2025 | 5x130 | 78.1 | 50-55 |
5x130 Pattern Context
This bolt pattern appears on 226 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x130:
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
2024 Ram ProMaster 3500 — Frequently Asked Questions
What is the bolt pattern for a 2024 Ram ProMaster 3500?
The 2024 Ram ProMaster 3500 uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 50-55mm.
What other years of Ram ProMaster 3500 have the same bolt pattern as the 2024?
The Ram ProMaster 3500 uses the 5x130 pattern from 2024 through 2025. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Why is matching the 78.1mm center bore important for the 2024 ProMaster 3500?
The 78.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2024 Ram ProMaster 3500?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2024 Ram?
The 2024 ProMaster 3500 uses a 5x130 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2024 Ram ProMaster 3500?
The factory center bore (hub bore) for the 2024 Ram ProMaster 3500 is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset