2014 Scion xD Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Scion xD, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 39 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2014 xD — Year-Specific Fitment Context
The 2014 model year is the final year of the Scion xD's 5x100 bolt pattern run (since 2008). Wheels from any 2008–2014 Scion xD are cross-compatible with the 2014 model.
Scion xD Bolt Pattern by Year
The table below shows how the xD's wheel specifications have changed over the years. The 2014 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2014 Scion xD
For your 2014 Scion xD, the bolt pattern is 5x100 with a critical center bore of 54.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibration and ensure proper load distribution. The factory offset is 39mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen and cause wheel separation. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Scion xD appears from 2008 to 2014 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50 miles, then check periodically.
- ✅ If using aftermarket wheels, verify hub bore and install hub-centric rings (54.1mm ID to wheel bore OD).
- ✅ Avoid spacers unless necessary; if used, ensure extended studs and proper offset to maintain scrub radius.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Scion xD — Frequently Asked Questions
What is the bolt pattern for a 2014 Scion xD?
The 2014 Scion xD uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 39mm.
What other years of Scion xD have the same bolt pattern as the 2014?
The Scion xD uses the 5x100 pattern from 2008 through 2014. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Can I use spacers on my 2014 Scion xD?
Yes, but ensure the wheel spacers match the 5x100 bolt pattern and 54.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the factory wheel offset for a 2014 Scion xD?
The OEM offset for the 2014 xD is typically around 39mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Scion fit my 2014 xD?
Only if they share the exact same 5x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 54.1mm.
How do I measure the bolt pattern on my 2014 Scion?
The 2014 xD uses a 5x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset