2013 Toyota Prius v Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Toyota Prius v, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2013 Prius v — Year-Specific Fitment Context
The 2013 Toyota Prius v is in year 2 of 6 using the 5x100 pattern (2012–2017). Wheels from any 2012–2017 Toyota Prius v are cross-compatible with the 2013 model.
Toyota Prius v Bolt Pattern by Year
The table below shows how the Prius v's wheel specifications have changed over the years. The 2013 model year is highlighted.
Fitment Notes
The 2013 Toyota Prius v has a bolt pattern of 5x100.
This means it is a 5 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota Prius v appears from 2012 to 2017 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
2013 Toyota Prius v — Frequently Asked Questions
What is the bolt pattern for a 2013 Toyota Prius v?
The 2013 Toyota Prius v uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 46mm.
What other years of Toyota Prius v have the same bolt pattern as the 2013?
The Toyota Prius v uses the 5x100 pattern from 2012 through 2017. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What is the center bore of a 2013 Toyota Prius v?
The factory center bore (hub bore) for the 2013 Toyota Prius v is 54.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2013 Toyota Prius v?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2013 Prius v, the PCD is 5x100.
How tight should I torque the lug nuts on a 2013 Toyota Prius v?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2013 Toyota Prius vs use lug bolts or lug nuts?
The 2013 Prius v requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Toyota Prius v is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2012-2017 (6 model years).
- Observed bolt-pattern variants: 1 (5x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2013 Toyota Prius v, please report it via our About page contact so we can verify and update this record.