2024 Volvo B12B Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Volvo B12B is 10x335. It has a center bore of 281.2 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2024 Volvo B12B Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x335 |
|---|---|
| Center Bore (Hub Bore) | 281.2 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2024 B12B — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Volvo B12B's 10x335 bolt pattern era, which continued through 2026 (3 consecutive years). Wheels from any 2024–2026 Volvo B12B are cross-compatible with the 2024 model.
Volvo B12B Bolt Pattern by Year
Looking for all generations? View the complete Volvo B12B (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the B12B's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 Volvo B12B Wheel Interchange & Donor Fitment Guide (10x335)
The 10x335 bolt pattern is shared by 23 vehicles in our database (uncommon). For safe wheel swaps on the 2024 Volvo B12B, donor rims must match the 10x335 PCD and have a center bore of at least 281.2 mm:
DIRECT HUB MATCH Same 10x335 Pattern & Exact 281.2mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Volvo B12M | 281.2 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
| 2024 Volvo B13R | 281.2 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
| 2024 Volvo B7R | 281.2 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
| 2024 Volvo B8R | 281.2 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
| 2024 Volvo B9R | 281.2 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
| 2024 Volvo FE | 281.2 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Volvo B12B — Frequently Asked Questions
What is the bolt pattern for a 2024 Volvo B12B?
The 2024 Volvo B12B uses a 10x335 bolt pattern (also called lug pattern or PCD). The center bore is 281.2mm and the offset is Not Applicablemm.
What other years of Volvo B12B have the same bolt pattern as the 2024?
The Volvo B12B uses the 10x335 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What is the factory wheel offset for a 2024 Volvo B12B?
The OEM offset for the 2024 B12B is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 281.2mm center bore important for the 2024 B12B?
The 281.2mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2024 Volvo B12B?
Absolutely. Just ensure the aftermarket wheels have a 10x335 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 281.2mm (using hub rings if larger).
What does Not Applicablemm offset mean for the 2024 B12B?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volvo.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →