2026 Volvo VHD Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Volvo VHD is 10x285.75. It has a center bore of 222 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2026 Volvo VHD Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Center Bore (Hub Bore) | 222 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2026 VHD — Year-Specific Fitment Context
The 2026 model year is the final year of the Volvo VHD's 10x285.75 bolt pattern run (since 2024). Wheels from any 2024–2026 Volvo VHD are cross-compatible with the 2026 model.
Volvo VHD Bolt Pattern by Year
Looking for all generations? View the complete Volvo VHD (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the VHD's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Volvo VHD Wheel Interchange & Donor Fitment Guide (10x285.75)
The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2026 Volvo VHD, donor rims must match the 10x285.75 PCD and have a center bore of at least 222 mm:
DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 222mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Freightliner EFX Front Engine Bus Chassis | 222 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner MD109 | 222 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Chevrolet 6500XD | 222 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Volvo VHD — Frequently Asked Questions
What is the bolt pattern for a 2026 Volvo VHD?
The 2026 Volvo VHD uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 222mm and the offset is Not Applicablemm.
What other years of Volvo VHD have the same bolt pattern as the 2026?
The Volvo VHD uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2026 Volvo VHD?
Absolutely. Just ensure the aftermarket wheels have a 10x285.75 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 222mm (using hub rings if larger).
Will wheels from another Volvo fit my 2026 VHD?
Only if they share the exact same 10x285.75 bolt pattern, a compatible offset, and a center bore equal to or larger than 222mm.
Do 2026 Volvo VHDs use lug bolts or lug nuts?
The 2026 VHD requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2026 Volvo VHD?
Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →