2025 Volvo VN Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Volvo VN is 10x285.75. It has a center bore of 220 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2025 Volvo VN Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Center Bore (Hub Bore) | 220 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2025 VN — Year-Specific Fitment Context
The 2025 Volvo VN is in year 2 of 3 using the 10x285.75 pattern (2024–2026). Wheels from any 2024–2026 Volvo VN are cross-compatible with the 2025 model.
Volvo VN Bolt Pattern by Year
Looking for all generations? View the complete Volvo VN (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the VN's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Volvo VN Wheel Interchange & Donor Fitment Guide (10x285.75)
The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2025 Volvo VN, donor rims must match the 10x285.75 PCD and have a center bore of at least 220 mm:
DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Freightliner XC Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner XC Formed Rail Rear Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner XC Modular Rail Rear Engine Motor Home Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner XC Raised Rail (Lowered Engine) Rear Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner XC Raised Rail Rear Engine Motor Home Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner XC-F Formed Rail Rear Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Volvo VAH | 221 mm | 221mm → 220mm |
Not Applicable |
| 2024 Volvo VHD | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Chevrolet 6500XD | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Freightliner EF Front Engine Bus Chassis | 221.1 mm | 221.1mm → 220mm |
Not Applicable |
| 2024 Freightliner EFX Front Engine Bus Chassis | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Freightliner MD109 | 222 mm | 222mm → 220mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Volvo VN — Frequently Asked Questions
What is the bolt pattern for a 2025 Volvo VN?
The 2025 Volvo VN uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220mm and the offset is Not Applicablemm.
What other years of Volvo VN have the same bolt pattern as the 2025?
The Volvo VN uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2025 Volvo VN?
Absolutely. Just ensure the aftermarket wheels have a 10x285.75 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 220mm (using hub rings if larger).
Will wheels from another Volvo fit my 2025 VN?
Only if they share the exact same 10x285.75 bolt pattern, a compatible offset, and a center bore equal to or larger than 220mm.
What does Not Applicablemm offset mean for the 2025 VN?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volvo.
Why is matching the 220mm center bore important for the 2025 VN?
The 220mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →