1992 Acura NSX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Acura NSX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 70.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1992 NSX — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Acura NSX's 5x114.3 bolt pattern era, which continued through 2005 (14 consecutive years). Wheels from any 1992–2005 Acura NSX are cross-compatible with the 1992 model. Across its full production run (1992–2022), the NSX has also used: 5x120.
Acura NSX Bolt Pattern by Year
The table below shows how the NSX's wheel specifications have changed over the years. The 1992 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1992 | 5x114.3 | 70.1 | 40 |
| 1993 | 5x114.3 | 70.1 | 40 |
| 1994 | 5x114.3 | 70.1 | 40 |
| 1995 | 5x114.3 | 70.1 | 40 |
| 1996 | 5x114.3 | 70.1 | 40 |
| 1997 | 5x114.3 | 70.1 | 40 |
| 1998 | 5x114.3 | 70.1 | 40 |
| 1999 | 5x114.3 | 70.1 | 40 |
| 2000 | 5x114.3 | 70.1 | 40 |
| 2001 | 5x114.3 | 70.1 | 40 |
| 2002 | 5x114.3 | 70.1 | 40 |
| 2003 | 5x114.3 | 70.1 | 40 |
| 2004 | 5x114.3 | 70.1 | 40 |
| 2005 | 5x114.3 | 70.1 | 40 |
| 2017 | 5x120 | 64.1 | 55 |
| 2018 | 5x120 | 64.1 | 55 |
| 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2021 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1992 Acura NSX
For your 1992 Acura NSX, the bolt pattern is 5x114.3, shared with 1992–2005 models. The center bore is 70.1mm; aftermarket wheels with a larger bore require hub-centric rings to prevent vibrations. Offset is critical: stock is 40mm, but a range of 35–45mm is acceptable. Going outside this range may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and proper seat type (cone or ball) to ensure safe clamping. Avoid using incorrect lug nuts, as they can loosen or damage the wheel.
Historical Fitment Data Reference
In our dataset, Acura NSX appears from 1992 to 2022 (20 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to ensure proper seating.
- ✅ Verify wheel bore diameter; if larger than 70.1mm, install hub-centric rings to avoid vibrations.
- ✅ Check offset carefully: lower than 35mm may rub the fender, higher than 45mm may contact the suspension.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Acura NSX — Frequently Asked Questions
What is the bolt pattern for a 1992 Acura NSX?
The 1992 Acura NSX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.1mm and the offset is 40mm.
What other years of Acura NSX have the same bolt pattern as the 1992?
The Acura NSX uses the 5x114.3 pattern from 1992 through 2005. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
What lug nut size does the 1992 Acura NSX use?
The 1992 Acura NSX uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 1992 Acura NSX?
The OEM offset for the 1992 NSX is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 1992 Acura NSX?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 70.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 1992 Acura NSX?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset