2001 Acura NSX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Acura NSX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 70.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2001 NSX — Year-Specific Fitment Context
The 2001 Acura NSX is in year 10 of 14 using the 5x114.3 pattern (1992–2005). Wheels from any 1992–2005 Acura NSX are cross-compatible with the 2001 model. Across its full production run (1992–2022), the NSX has also used: 5x120.
Acura NSX Bolt Pattern by Year
The table below shows how the NSX's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 70.1 | 40 |
| 1993 | 5x114.3 | 70.1 | 40 |
| 1994 | 5x114.3 | 70.1 | 40 |
| 1995 | 5x114.3 | 70.1 | 40 |
| 1996 | 5x114.3 | 70.1 | 40 |
| 1997 | 5x114.3 | 70.1 | 40 |
| 1998 | 5x114.3 | 70.1 | 40 |
| 1999 | 5x114.3 | 70.1 | 40 |
| 2000 | 5x114.3 | 70.1 | 40 |
| ▸ 2001 | 5x114.3 | 70.1 | 40 |
| 2002 | 5x114.3 | 70.1 | 40 |
| 2003 | 5x114.3 | 70.1 | 40 |
| 2004 | 5x114.3 | 70.1 | 40 |
| 2005 | 5x114.3 | 70.1 | 40 |
| 2017 | 5x120 | 64.1 | 55 |
| 2018 | 5x120 | 64.1 | 55 |
| 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2021 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2001 Acura NSX
For your 2001 Acura NSX, the bolt pattern is 5x114.3 with a critical center bore of 70.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory spec is around 40mm. Straying too far (e.g., +30 or +50) can cause rubbing or clearance issues. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) seat. Ball-seat or incorrect nuts can lead to wheel loosening. Re-torque after 50-100 miles. Wheels from 1992-2005 NSX are direct fit; avoid 5x120 pattern from later models.
Historical Fitment Data Reference
In our dataset, Acura NSX appears from 1992 to 2022 (20 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings match the 70.1mm bore precisely.
- ✅ Check inner clearance for brake calipers; some 17-inch wheels may not clear aftermarket big brake kits.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Acura NSX — Frequently Asked Questions
What is the bolt pattern for a 2001 Acura NSX?
The 2001 Acura NSX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.1mm and the offset is 40mm.
What other years of Acura NSX have the same bolt pattern as the 2001?
The Acura NSX uses the 5x114.3 pattern from 1992 through 2005. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
Do 2001 Acura NSXs use lug bolts or lug nuts?
The 2001 NSX requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2001 Acura NSX use?
The 2001 Acura NSX uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 40mm offset mean for the 2001 NSX?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Acura.
What is the PCD for a 2001 Acura NSX?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2001 NSX, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset