2014 Acura RLX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Acura RLX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2014 RLX — Year-Specific Fitment Context
The 2014 model year marks the beginning of the Acura RLX's 5x120 bolt pattern era, which continued through 2020 (7 consecutive years). Wheels from any 2014–2020 Acura RLX are cross-compatible with the 2014 model.
Acura RLX Bolt Pattern by Year
The table below shows how the RLX's wheel specifications have changed over the years. The 2014 model year is highlighted.
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2014 Acura RLX
For your 2014 Acura RLX, the bolt pattern is 5x120 with a 64.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (conical/60-degree taper) to avoid wheel loosening. Improper lug nut seating can lead to catastrophic failure. Verify that aftermarket wheels are hub-centric and load-rated for your vehicle.
Historical Fitment Data Reference
In our dataset, Acura RLX appears from 2014 to 2020 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with a center bore larger than 64.1mm without hub rings; vibrations may occur.
- ✅ Check inner clearance for offset changes; 50mm offset is optimal for brake caliper clearance.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Acura RLX — Frequently Asked Questions
What is the bolt pattern for a 2014 Acura RLX?
The 2014 Acura RLX uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Acura RLX have the same bolt pattern as the 2014?
The Acura RLX uses the 5x120 pattern from 2014 through 2020. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Will wheels from another Acura fit my 2014 RLX?
Only if they share the exact same 5x120 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
What lug nut size does the 2014 Acura RLX use?
The 2014 Acura RLX uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2014 Acura RLXs use lug bolts or lug nuts?
The 2014 RLX requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2014 Acura RLX?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset