2018 Alfa Romeo 4C Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Alfa Romeo 4C, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x98 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.25 |
| Center Bore (CB) | 58.1 mm |
| Offset (ET) | 38 front, 44 rear |
| Torque Specs | 80 ft-lbs (108 Nm) |
2018 4C — Year-Specific Fitment Context
The 2018 model year is the final year of the Alfa Romeo 4C's 5x98 bolt pattern run (since 2015). Wheels from any 2015–2018 Alfa Romeo 4C are cross-compatible with the 2018 model.
Alfa Romeo 4C Bolt Pattern by Year
The table below shows how the 4C's wheel specifications have changed over the years. The 2018 model year is highlighted.
Fitment Notes
The 2018 Alfa Romeo 4C has a bolt pattern of 5x98.
This means it is a 5 lug pattern with a circle diameter of 98mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Alfa Romeo 4C appears from 2015 to 2018 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 6.0 mm
5x98 Pattern Context
This bolt pattern appears on 30 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x98:
2018 Alfa Romeo 4C — Frequently Asked Questions
What is the bolt pattern for a 2018 Alfa Romeo 4C?
The 2018 Alfa Romeo 4C uses a 5x98 bolt pattern (also called lug pattern or PCD). The center bore is 58.1mm and the offset is 38 front, 44 rearmm.
What other years of Alfa Romeo 4C have the same bolt pattern as the 2018?
The Alfa Romeo 4C uses the 5x98 pattern from 2015 through 2018. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2018 Alfa Romeo 4C?
Absolutely. Just ensure the aftermarket wheels have a 5x98 bolt pattern, an offset near 38 front, 44 rearmm, and a center bore of at least 58.1mm (using hub rings if larger).
Do 2018 Alfa Romeo 4Cs use lug bolts or lug nuts?
The 2018 4C requires B 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2018 Alfa Romeo 4C use?
The 2018 Alfa Romeo 4C uses B 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2018 Alfa Romeo 4C?
Yes, but ensure the wheel spacers match the 5x98 bolt pattern and 58.1mm center bore. Also verify that you have enough thread engagement for your B 12x1.25 hardware.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Editorial Fitment Notes
Alfa Romeo 4C is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2015-2018 (4 model years).
- Observed bolt-pattern variants: 1 (5x98).
- Observed total offset span across years: 6.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2018 Alfa Romeo 4C, please report it via our About page contact so we can verify and update this record.