1992 Audi 100 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Audi 100, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1992 100 — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Audi 100's 5x112 bolt pattern era, which continued through 1994 (3 consecutive years). Wheels from any 1992–1994 Audi 100 are cross-compatible with the 1992 model.
Audi 100 Bolt Pattern by Year
The table below shows how the 100's wheel specifications have changed over the years. The 1992 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 1992 Audi 100
For your 1992 Audi 100, the bolt pattern is 5x112 with a center bore of 57.1mm. When selecting aftermarket wheels, ensure they have a center bore of at least 57.1mm; if larger, use hub-centric rings to prevent vibrations and ensure proper load distribution. The offset is critical: the factory range is around 42mm. Deviating more than ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (ball or cone seat, depending on the wheel). Mixing seat types can lead to loose wheels and accidents. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Audi 100 appears from 1992 to 1994 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always re-torque lug nuts to 90 ft-lbs after 50-100 miles of driving to account for settling.
- ✅ If using aftermarket wheels, verify that the center bore is at least 57.1mm; use hub-centric rings if larger.
- ✅ Avoid using lug nuts with incorrect seat type (ball vs. cone) as this can cause wheel loosening and safety hazards.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Audi 100 — Frequently Asked Questions
What is the bolt pattern for a 1992 Audi 100?
The 1992 Audi 100 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 42mm.
What other years of Audi 100 have the same bolt pattern as the 1992?
The Audi 100 uses the 5x112 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
Can I use spacers on my 1992 Audi 100?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your B 14x1.50 hardware.
Why is matching the 57.1mm center bore important for the 1992 100?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 1992 Audi 100?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1992 100, the PCD is 5x112.
What is the factory wheel offset for a 1992 Audi 100?
The OEM offset for the 1992 100 is typically around 42mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset