2025 Volkswagen Atlas Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Volkswagen Atlas is 5x112. It has a center bore of 57.1 mm, an offset range of 34-40, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2025 Volkswagen Atlas Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 57.1 mm |
| Offset Range (ET) | 34-40 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2025 Atlas — Year-Specific Fitment Context
The 2025 Volkswagen Atlas is in year 8 of 9 using the 5x112 pattern (2018–2026). Wheels from any 2018–2026 Volkswagen Atlas are cross-compatible with the 2025 model.
Volkswagen Atlas Bolt Pattern by Year
Looking for all generations? View the complete Volkswagen Atlas (2018–2026) Bolt Pattern & Generation Guide →
The table below shows how the Atlas's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Volkswagen Atlas Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2025 Volkswagen Atlas, donor rims must match the 5x112 PCD and have a center bore of at least 57.1 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 57.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Lamborghini Huracan | 57.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2025 Lamborghini Revuelto | 57.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2026 Lamborghini Temerario | 57.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2019 McLaren 570GT | 57.1 mm (Exact) | 35-45mm | M14x1.5 (Ball) |
| 2019 McLaren 570S | 57.1 mm (Exact) | 35-45mm | M14x1.5 (Cone) |
| 2019 McLaren 600LT | 57.1 mm (Exact) | 35-45mm | M14x1.5 (Ball) |
HUB RING FITMENT Same 5x112 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2026 BMW X4 | 66.6 mm | 66.6mm → 57.1mm |
28-43 |
| 2024 BMW X4 M | 66.6 mm | 66.6mm → 57.1mm |
25-40 |
| 2019 BMW X5 | 66.6 mm | 66.6mm → 57.1mm |
25-40 |
| 2021 BMW X5 M | 66.6 mm | 66.6mm → 57.1mm |
25-40 |
| 2019 BMW X6 | 66.6 mm | 66.6mm → 57.1mm |
25-40 |
| 2019 BMW X6 M | 66.6 mm | 66.6mm → 57.1mm |
25-40 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Volkswagen Atlas — Frequently Asked Questions
What is the bolt pattern for a 2025 Volkswagen Atlas?
The 2025 Volkswagen Atlas uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 34-40mm.
What other years of Volkswagen Atlas have the same bolt pattern as the 2025?
The Volkswagen Atlas uses the 5x112 pattern from 2018 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2025 Volkswagen?
The 2025 Atlas uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2025 Volkswagen Atlass use lug bolts or lug nuts?
The 2025 Atlas requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2025 Volkswagen Atlas?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the factory wheel offset for a 2025 Volkswagen Atlas?
The OEM offset for the 2025 Atlas is typically around 34-40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →