2024 Volkswagen Atlas Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Volkswagen Atlas, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 34 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2024 Atlas — Year-Specific Fitment Context
The 2024 model year is the final year of the Volkswagen Atlas's 5x112 bolt pattern run (since 2018). Wheels from any 2018–2024 Volkswagen Atlas are cross-compatible with the 2024 model.
Volkswagen Atlas Bolt Pattern by Year
The table below shows how the Atlas's wheel specifications have changed over the years. The 2024 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2024 Volkswagen Atlas
For the 2024 Volkswagen Atlas, the bolt pattern is 5x112 with a center bore of 57.1mm. When selecting aftermarket wheels, ensure they are hub-centric or use hub-centric rings to prevent vibrations. The offset is critical: stock is 34mm; deviations affect handling and clearance. Always verify lug nut thread pitch (14x1.5) and seat type (ball seat) to avoid loosening. Wheels from 2018–2024 Atlas models are compatible. Improper fitment can lead to safety hazards.
Historical Fitment Data Reference
In our dataset, Volkswagen Atlas appears from 2018 to 2024 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 30mm or above 40mm without verifying brake and suspension clearance.
- ✅ Use only ball-seat lug nuts; cone-seat nuts can cause wheel damage or loosening.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Volkswagen Atlas — Frequently Asked Questions
What is the bolt pattern for a 2024 Volkswagen Atlas?
The 2024 Volkswagen Atlas uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 34mm.
What other years of Volkswagen Atlas have the same bolt pattern as the 2024?
The Volkswagen Atlas uses the 5x112 pattern from 2018 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What lug nut size does the 2024 Volkswagen Atlas use?
The 2024 Volkswagen Atlas uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2024 Volkswagen Atlas?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How tight should I torque the lug nuts on a 2024 Volkswagen Atlas?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2024 Volkswagen?
The 2024 Atlas uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset