2019 Bentley Mulsanne Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Bentley Mulsanne, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 Mulsanne — Year-Specific Fitment Context
The 2019 model year is the final year of the Bentley Mulsanne's 5x112 bolt pattern run (since 2011). Wheels from any 2011–2019 Bentley Mulsanne are cross-compatible with the 2019 model.
Bentley Mulsanne Bolt Pattern by Year
The table below shows how the Mulsanne's wheel specifications have changed over the years. The 2019 model year is highlighted.
Fitment Notes
The 2019 Bentley Mulsanne has a bolt pattern of 5x112.
This means it is a 5 lug pattern with a circle diameter of 112mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Bentley Mulsanne appears from 2011 to 2019 (9 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 87.0 mm
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
2019 Bentley Mulsanne — Frequently Asked Questions
What is the bolt pattern for a 2019 Bentley Mulsanne?
The 2019 Bentley Mulsanne uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 35-45mmmm.
What other years of Bentley Mulsanne have the same bolt pattern as the 2019?
The Bentley Mulsanne uses the 5x112 pattern from 2011 through 2019. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2019 Bentley?
The 2019 Mulsanne uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Bentley fit my 2019 Mulsanne?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
What lug nut size does the 2019 Bentley Mulsanne use?
The 2019 Bentley Mulsanne uses M14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2019 Bentley Mulsanne?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 35-45mmmm, and a center bore of at least 57.1mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Bentley Mulsanne is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2011-2019 (9 model years).
- Observed bolt-pattern variants: 1 (5x112).
- Observed total offset span across years: 87.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2019 Bentley Mulsanne, please report it via our About page contact so we can verify and update this record.