2025 Audi A6 allroad Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Audi A6 allroad is 5x112. It has a center bore of 66.5 mm, an offset range of 35-45, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2025 Audi A6 allroad Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.5 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2025 A6 allroad — Year-Specific Fitment Context
The 2025 Audi A6 allroad is in year 6 of 7 using the 5x112 pattern (2020–2026). Wheels from any 2020–2026 Audi A6 allroad are cross-compatible with the 2025 model.
Audi A6 allroad Bolt Pattern by Year
Looking for all generations? View the complete Audi A6 allroad (2020–2026) Bolt Pattern & Generation Guide →
The table below shows how the A6 allroad's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Audi A6 allroad Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2025 Audi A6 allroad, donor rims must match the 5x112 PCD and have a center bore of at least 66.5 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2016 Mercedes-Benz CLS-Class | 66.6 mm (Exact) | 35 | B 14x1.50 (Ball) |
| 2017 Mercedes-Benz E-Class | 66.5 mm (Exact) | 49 | B 14x1.50 (Ball) |
| 2025 Mercedes-Benz EQB-Class | 66.5 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2025 Mercedes-Benz EQE-Class Sedan | 66.6 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2025 Mercedes-Benz EQE-Class SUV | 66.6 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2025 Mercedes-Benz EQS-Class Sedan | 66.6 mm (Exact) | 35-45 | 14x1.5 (Ball) |
HUB RING FITMENT Same 5x112 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2014 BMW i3 | 66.7 mm | 66.7mm → 66.5mm |
43 (The car has thin wheels!) |
| 2014 BMW i8 | 66.7 mm | 66.7mm → 66.5mm |
39 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Audi A6 allroad — Frequently Asked Questions
What is the bolt pattern for a 2025 Audi A6 allroad?
The 2025 Audi A6 allroad uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 35-45mm.
What other years of Audi A6 allroad have the same bolt pattern as the 2025?
The Audi A6 allroad uses the 5x112 pattern from 2020 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What lug nut size does the 2025 Audi A6 allroad use?
The 2025 Audi A6 allroad uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2025 Audi A6 allroad?
The OEM offset for the 2025 A6 allroad is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 35-45mm offset mean for the 2025 A6 allroad?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Audi.
How tight should I torque the lug nuts on a 2025 Audi A6 allroad?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →