2016 Mercedes-Benz CLS-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Mercedes-Benz CLS-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 35 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2016 CLS-Class — Year-Specific Fitment Context
The 2016 model year is the final year of the Mercedes-Benz CLS-Class's 5x112 bolt pattern run (since 2006). Wheels from any 2006–2016 Mercedes-Benz CLS-Class are cross-compatible with the 2016 model.
Mercedes-Benz CLS-Class Bolt Pattern by Year
The table below shows how the CLS-Class's wheel specifications have changed over the years. The 2016 model year is highlighted.
Fitment Notes
The 2016 Mercedes-Benz CLS-Class has a bolt pattern of 5x112.
This means it is a 5 lug pattern with a circle diameter of 112mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Mercedes-Benz CLS-Class appears from 2006 to 2016 (11 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 7.0 mm
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
2016 Mercedes-Benz CLS-Class — Frequently Asked Questions
What is the bolt pattern for a 2016 Mercedes-Benz CLS-Class?
The 2016 Mercedes-Benz CLS-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 35mm.
What other years of Mercedes-Benz CLS-Class have the same bolt pattern as the 2016?
The Mercedes-Benz CLS-Class uses the 5x112 pattern from 2006 through 2016. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
What is the center bore of a 2016 Mercedes-Benz CLS-Class?
The factory center bore (hub bore) for the 2016 Mercedes-Benz CLS-Class is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2016 Mercedes-Benz CLS-Class?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 35mm, and a center bore of at least 66.6mm (using hub rings if larger).
What lug nut size does the 2016 Mercedes-Benz CLS-Class use?
The 2016 Mercedes-Benz CLS-Class uses B 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Mercedes-Benz fit my 2016 CLS-Class?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Mercedes-Benz CLS-Class is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2006-2016 (11 model years).
- Observed bolt-pattern variants: 1 (5x112).
- Observed total offset span across years: 7.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2016 Mercedes-Benz CLS-Class, please report it via our About page contact so we can verify and update this record.