2009 Mercedes-Benz CLS-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Mercedes-Benz CLS-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 35 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2009 CLS-Class — Year-Specific Fitment Context
The 2009 Mercedes-Benz CLS-Class is in year 4 of 11 using the 5x112 pattern (2006–2016). Wheels from any 2006–2016 Mercedes-Benz CLS-Class are cross-compatible with the 2009 model.
Mercedes-Benz CLS-Class Bolt Pattern by Year
The table below shows how the CLS-Class's wheel specifications have changed over the years. The 2009 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2009 Mercedes-Benz CLS-Class
For your 2009 Mercedes-Benz CLS-Class, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive: stock is around 35mm. Deviating more than ±5mm may cause rubbing or clearance issues. Always use the correct lug nuts: B 14x1.50 thread pitch with ball seat (OEM) or cone seat (aftermarket). Mixing seat types can lead to wheel loosening. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz CLS-Class appears from 2006 to 2016 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings if aftermarket wheels have a larger center bore than 66.6mm.
- ✅ Stick to offset between 30-40mm to avoid rubbing on fenders or suspension.
- ✅ Re-torque lug nuts to 110-130 Nm after 50 miles of driving.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Mercedes-Benz CLS-Class — Frequently Asked Questions
What is the bolt pattern for a 2009 Mercedes-Benz CLS-Class?
The 2009 Mercedes-Benz CLS-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 35mm.
What other years of Mercedes-Benz CLS-Class have the same bolt pattern as the 2009?
The Mercedes-Benz CLS-Class uses the 5x112 pattern from 2006 through 2016. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
What is the factory wheel offset for a 2009 Mercedes-Benz CLS-Class?
The OEM offset for the 2009 CLS-Class is typically around 35mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2009 Mercedes-Benz CLS-Classs use lug bolts or lug nuts?
The 2009 CLS-Class requires B 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2009 Mercedes-Benz CLS-Class?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 35mm, and a center bore of at least 66.6mm (using hub rings if larger).
What is the PCD for a 2009 Mercedes-Benz CLS-Class?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2009 CLS-Class, the PCD is 5x112.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset