2019 BMW i8 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 BMW i8, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.25 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 25-40 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 i8 — Year-Specific Fitment Context
The 2019 model year is the final year of the BMW i8's 5x112 bolt pattern run (since 2014). Wheels from any 2014–2019 BMW i8 are cross-compatible with the 2019 model.
BMW i8 Bolt Pattern by Year
The table below shows how the i8's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2019 BMW i8
For the 2019 BMW i8, the correct bolt pattern is 5x112, center bore 66.6mm, and offset range 25-40mm. When selecting aftermarket wheels, hub-centric rings are mandatory to match the 66.6mm bore, preventing vibrations and ensuring proper load distribution. Offset is critical: too low (under 25mm) may cause rubbing on fenders or suspension; too high (over 40mm) can lead to brake caliper clearance issues. Always use lug nuts with the correct thread pitch (14x1.25) and seat type—either conical (60-degree) or ball seat, as specified by the wheel manufacturer. Mixing seat types can cause wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, BMW i8 appears from 2014 to 2019 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 79.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 ft-lb after 50-100 miles; check again at every tire rotation.
- ✅ Avoid using hub-centric rings made of plastic; opt for aluminum or steel for durability.
- ✅ If installing wider wheels, verify clearance with the i8's hybrid battery pack and rear electric motor.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 BMW i8 — Frequently Asked Questions
What is the bolt pattern for a 2019 BMW i8?
The 2019 BMW i8 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 25-40mm.
What other years of BMW i8 have the same bolt pattern as the 2019?
The BMW i8 uses the 5x112 pattern from 2014 through 2019. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2019 BMW i8?
Refer to your owner's manual for exact specs, but always tighten the 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another BMW fit my 2019 i8?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
What is the PCD for a 2019 BMW i8?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 i8, the PCD is 5x112.
What does 25-40mm offset mean for the 2019 i8?
An offset of 25-40mm means the wheel's mounting surface is 25-40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your BMW.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset