2019 Volkswagen Atlas Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Volkswagen Atlas, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 34 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 Atlas — Year-Specific Fitment Context
The 2019 Volkswagen Atlas is in year 2 of 7 using the 5x112 pattern (2018–2024). Wheels from any 2018–2024 Volkswagen Atlas are cross-compatible with the 2019 model.
Volkswagen Atlas Bolt Pattern by Year
The table below shows how the Atlas's wheel specifications have changed over the years. The 2019 model year is highlighted.
Fitment Notes
The 2019 Volkswagen Atlas has a bolt pattern of 5x112.
This means it is a 5 lug pattern with a circle diameter of 112mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Volkswagen Atlas appears from 2018 to 2024 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
2019 Volkswagen Atlas — Frequently Asked Questions
What is the bolt pattern for a 2019 Volkswagen Atlas?
The 2019 Volkswagen Atlas uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 34mm.
What other years of Volkswagen Atlas have the same bolt pattern as the 2019?
The Volkswagen Atlas uses the 5x112 pattern from 2018 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2019 Volkswagen Atlas?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 34mm offset mean for the 2019 Atlas?
An offset of 34mm means the wheel's mounting surface is 34mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volkswagen.
Can I use spacers on my 2019 Volkswagen Atlas?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the center bore of a 2019 Volkswagen Atlas?
The factory center bore (hub bore) for the 2019 Volkswagen Atlas is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Volkswagen Atlas is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2018-2024 (7 model years).
- Observed bolt-pattern variants: 1 (5x112).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2019 Volkswagen Atlas, please report it via our About page contact so we can verify and update this record.