2022 Mercedes-Benz Sprinter 3500 XD Crew Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Mercedes-Benz Sprinter 3500 XD Crew, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2022 Sprinter 3500 XD Crew — Year-Specific Fitment Context
The 2022 model year is the final year of the Mercedes-Benz Sprinter 3500 XD Crew's 5x112 bolt pattern run (since 2019). Wheels from any 2019–2022 Mercedes-Benz Sprinter 3500 XD Crew are cross-compatible with the 2022 model.
Mercedes-Benz Sprinter 3500 XD Crew Bolt Pattern by Year
The table below shows how the Sprinter 3500 XD Crew's wheel specifications have changed over the years. The 2022 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2022 Mercedes-Benz Sprinter 3500 XD Crew
For your 2022 Mercedes-Benz Sprinter 3500 XD Crew, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels must have a bore ≥66.6mm; use hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset must stay within 30-50mm to avoid rubbing or suspension interference. Always use lug nuts with the correct 14x1.5 thread pitch and matching seat type (cone or ball seat) to prevent loosening. Improper seating can cause wheel separation. Verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Sprinter 3500 XD Crew appears from 2019 to 2022 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with a center bore smaller than 66.6mm; they will not fit without machining.
- ✅ For lifted or lowered vehicles, offset may need adjustment within the 30-50mm range to maintain clearance.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2022 Mercedes-Benz Sprinter 3500 XD Crew — Frequently Asked Questions
What is the bolt pattern for a 2022 Mercedes-Benz Sprinter 3500 XD Crew?
The 2022 Mercedes-Benz Sprinter 3500 XD Crew uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Sprinter 3500 XD Crew have the same bolt pattern as the 2022?
The Mercedes-Benz Sprinter 3500 XD Crew uses the 5x112 pattern from 2019 through 2022. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
What is the PCD for a 2022 Mercedes-Benz Sprinter 3500 XD Crew?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2022 Sprinter 3500 XD Crew, the PCD is 5x112.
Do 2022 Mercedes-Benz Sprinter 3500 XD Crews use lug bolts or lug nuts?
The 2022 Sprinter 3500 XD Crew requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2022 Mercedes-Benz Sprinter 3500 XD Crew?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2022 Mercedes-Benz Sprinter 3500 XD Crew?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset