2020 Mercedes-Benz Sprinter 3500 XD Crew Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Mercedes-Benz Sprinter 3500 XD Crew, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 Sprinter 3500 XD Crew — Year-Specific Fitment Context
The 2020 Mercedes-Benz Sprinter 3500 XD Crew is in year 2 of 4 using the 5x112 pattern (2019–2022). Wheels from any 2019–2022 Mercedes-Benz Sprinter 3500 XD Crew are cross-compatible with the 2020 model.
Mercedes-Benz Sprinter 3500 XD Crew Bolt Pattern by Year
The table below shows how the Sprinter 3500 XD Crew's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2020 Mercedes-Benz Sprinter 3500 XD Crew
For the 2020 Mercedes-Benz Sprinter 3500 XD Crew, the bolt pattern is 5x112 with a critical center bore of 66.6mm. Aftermarket wheels must have a bore ≥66.6mm; use hub-centric rings to avoid vibration and ensure proper load distribution. The offset range is 30-50mm; staying within this range prevents rubbing and maintains suspension geometry. Always verify lug nut thread pitch (14x1.5) and seat type—use conical (60-degree) or ball-seat nuts as specified by the wheel manufacturer. Incorrect lug nuts can cause wheel loosening. Cross-compatible with 2019–2022 Sprinter 3500 XD Crew wheels.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Sprinter 3500 XD Crew appears from 2019 to 2022 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and hub damage.
- ✅ Check that aftermarket wheels clear the brake calipers and suspension components, especially with lower offsets.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Mercedes-Benz Sprinter 3500 XD Crew — Frequently Asked Questions
What is the bolt pattern for a 2020 Mercedes-Benz Sprinter 3500 XD Crew?
The 2020 Mercedes-Benz Sprinter 3500 XD Crew uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Sprinter 3500 XD Crew have the same bolt pattern as the 2020?
The Mercedes-Benz Sprinter 3500 XD Crew uses the 5x112 pattern from 2019 through 2022. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2020 Mercedes-Benz?
The 2020 Sprinter 3500 XD Crew uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Mercedes-Benz fit my 2020 Sprinter 3500 XD Crew?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Can I put aftermarket wheels on my 2020 Mercedes-Benz Sprinter 3500 XD Crew?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-50mm, and a center bore of at least 66.6mm (using hub rings if larger).
What is the factory wheel offset for a 2020 Mercedes-Benz Sprinter 3500 XD Crew?
The OEM offset for the 2020 Sprinter 3500 XD Crew is typically around 30-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset