2018 Mercedes-Benz Sprinter WORKER Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Mercedes-Benz Sprinter WORKER Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2018 Sprinter WORKER Cargo — Year-Specific Fitment Context
The 2018 model year is the final year of the Mercedes-Benz Sprinter WORKER Cargo's 5x112 bolt pattern run (since 2017). Wheels from any 2017–2018 Mercedes-Benz Sprinter WORKER Cargo are cross-compatible with the 2018 model.
Mercedes-Benz Sprinter WORKER Cargo Bolt Pattern by Year
The table below shows how the Sprinter WORKER Cargo's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2017 | 5x112 | 66.6 | 30-50 |
| ▸ 2018 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2018 Mercedes-Benz Sprinter WORKER Cargo
For your 2018 Mercedes-Benz Sprinter WORKER Cargo, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels must be hub-centric; use hub-centric rings to avoid vibration. Offset range is 30-50mm; staying within 35-45mm ensures proper clearance. Lug nuts are 14x1.5 with a cone seat—never use ball-seat nuts. Always verify load rating for cargo use. This is the final year for 5x112; 2017-2018 wheels are cross-compatible.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Sprinter WORKER Cargo appears from 2017 to 2018 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to prevent loosening.
- ✅ Avoid wheels with offset below 30mm to prevent rubbing on suspension components.
- ✅ Check that aftermarket wheels have a load rating of at least 1,500 kg per wheel for cargo safety.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Mercedes-Benz Sprinter WORKER Cargo — Frequently Asked Questions
What is the bolt pattern for a 2018 Mercedes-Benz Sprinter WORKER Cargo?
The 2018 Mercedes-Benz Sprinter WORKER Cargo uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Sprinter WORKER Cargo have the same bolt pattern as the 2018?
The Mercedes-Benz Sprinter WORKER Cargo uses the 5x112 pattern from 2017 through 2018. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What is the factory wheel offset for a 2018 Mercedes-Benz Sprinter WORKER Cargo?
The OEM offset for the 2018 Sprinter WORKER Cargo is typically around 30-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2018 Mercedes-Benz Sprinter WORKER Cargo?
The factory center bore (hub bore) for the 2018 Mercedes-Benz Sprinter WORKER Cargo is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2018 Mercedes-Benz Sprinter WORKER Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 Sprinter WORKER Cargo, the PCD is 5x112.
Will wheels from another Mercedes-Benz fit my 2018 Sprinter WORKER Cargo?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset