2017 Mercedes-Benz Sprinter WORKER Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Mercedes-Benz Sprinter WORKER Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2017 Sprinter WORKER Cargo — Year-Specific Fitment Context
The 2017 model year marks the beginning of the Mercedes-Benz Sprinter WORKER Cargo's 5x112 bolt pattern era, which continued through 2018 (2 consecutive years). Wheels from any 2017–2018 Mercedes-Benz Sprinter WORKER Cargo are cross-compatible with the 2017 model.
Mercedes-Benz Sprinter WORKER Cargo Bolt Pattern by Year
The table below shows how the Sprinter WORKER Cargo's wheel specifications have changed over the years. The 2017 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2017 | 5x112 | 66.6 | 30-50 |
| 2018 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2017 Mercedes-Benz Sprinter WORKER Cargo
For the 2017 Mercedes-Benz Sprinter WORKER Cargo, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels must use hub-centric rings to avoid vibration and ensure proper load distribution. The offset range is 30-50mm; staying within this prevents rubbing or suspension interference. Always verify lug nut thread pitch (14x1.5) and seat type—use ball-seat or cone-seat lugs as specified. Mismatched lugs can cause wheel detachment. For safety, re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Sprinter WORKER Cargo appears from 2017 to 2018 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 130-140 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels with a center bore larger than 66.6mm without hub-centric rings.
- ✅ Check for brake caliper clearance when using aftermarket wheels, especially with low offsets.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Mercedes-Benz Sprinter WORKER Cargo — Frequently Asked Questions
What is the bolt pattern for a 2017 Mercedes-Benz Sprinter WORKER Cargo?
The 2017 Mercedes-Benz Sprinter WORKER Cargo uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Sprinter WORKER Cargo have the same bolt pattern as the 2017?
The Mercedes-Benz Sprinter WORKER Cargo uses the 5x112 pattern from 2017 through 2018. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
Do 2017 Mercedes-Benz Sprinter WORKER Cargos use lug bolts or lug nuts?
The 2017 Sprinter WORKER Cargo requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2017 Mercedes-Benz Sprinter WORKER Cargo use?
The 2017 Mercedes-Benz Sprinter WORKER Cargo uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2017 Mercedes-Benz Sprinter WORKER Cargo?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-50mm, and a center bore of at least 66.6mm (using hub rings if larger).
Can I use spacers on my 2017 Mercedes-Benz Sprinter WORKER Cargo?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset