2020 Volkswagen Atlas Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Volkswagen Atlas, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 34 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 Atlas — Year-Specific Fitment Context
The 2020 Volkswagen Atlas is in year 3 of 7 using the 5x112 pattern (2018–2024). Wheels from any 2018–2024 Volkswagen Atlas are cross-compatible with the 2020 model.
Volkswagen Atlas Bolt Pattern by Year
The table below shows how the Atlas's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2020 Volkswagen Atlas
For your 2020 Volkswagen Atlas, the 5x112 bolt pattern and 57.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibrations and ensure proper load support. The factory offset is 34mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct 14x1.5 thread pitch and a conical (60-degree) seat—ball or flat seats are unsafe. Re-torque after 50-100 miles. Wheels from 2018-2024 Atlas models are direct fit.
Historical Fitment Data Reference
In our dataset, Volkswagen Atlas appears from 2018 to 2024 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 120 ft-lb after 50-100 miles of driving.
- ✅ Avoid using aftermarket wheels with offset below 29mm or above 39mm to prevent rubbing.
- ✅ Verify that aftermarket wheels include hub-centric rings for the 57.1mm bore; otherwise, vibrations may occur.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Volkswagen Atlas — Frequently Asked Questions
What is the bolt pattern for a 2020 Volkswagen Atlas?
The 2020 Volkswagen Atlas uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 34mm.
What other years of Volkswagen Atlas have the same bolt pattern as the 2020?
The Volkswagen Atlas uses the 5x112 pattern from 2018 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Why is matching the 57.1mm center bore important for the 2020 Atlas?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 2020 Volkswagen Atlas?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 Atlas, the PCD is 5x112.
Will wheels from another Volkswagen fit my 2020 Atlas?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
How tight should I torque the lug nuts on a 2020 Volkswagen Atlas?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset