1993 Audi 90 Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Audi 90, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 4x108
Lug Nut / Bolt Size B 14x1.50
Center Bore (CB) 57.1 mm
Offset (ET) 45
Torque Specs 100 ft-lbs (135 Nm)

1993 90 — Year-Specific Fitment Context

The 1993 model year marks the beginning of the Audi 90's 4x108 bolt pattern era, which continued through 1995 (3 consecutive years). Wheels from any 1993–1995 Audi 90 are cross-compatible with the 1993 model.

Audi 90 Bolt Pattern by Year

The table below shows how the 90's wheel specifications have changed over the years. The 1993 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 1993 4x108 57.1 45
1994 4x108 57.1 45
1995 4x108 57.1 45

4x108 Pattern Context

This bolt pattern appears on 76 vehicles in our current database and is considered uncommon.

Examples of other vehicles using 4x108:

Expert Buying Guide for 1993 Audi 90

For your 1993 Audi 90, the 4x108 bolt pattern is shared with 1993–1995 models. The 57.1mm center bore is critical; aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: the factory 45mm offset maintains suspension geometry and brake clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—factory wheels use ball seats, while aftermarket wheels may require conical (60-degree) or ball seats. Mixing seat types can lead to wheel loosening. Safety first: verify all specs before installation.

Historical Fitment Data Reference

In our dataset, Audi 90 appears from 1993 to 1995 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.

  • Observed bolt-pattern variants for this model: 1
  • Observed center-bore variants for this model: 1
  • Observed lug-size variants for this model: 1
  • Observed total offset span across years: 0.0 mm

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

1993 Audi 90 — Frequently Asked Questions

What is the bolt pattern for a 1993 Audi 90?

The 1993 Audi 90 uses a 4x108 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 45mm.

What other years of Audi 90 have the same bolt pattern as the 1993?

The Audi 90 uses the 4x108 pattern from 1993 through 1995. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.

Can I put aftermarket wheels on my 1993 Audi 90?

Absolutely. Just ensure the aftermarket wheels have a 4x108 bolt pattern, an offset near 45mm, and a center bore of at least 57.1mm (using hub rings if larger).

What is the factory wheel offset for a 1993 Audi 90?

The OEM offset for the 1993 90 is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

What is the PCD for a 1993 Audi 90?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1993 90, the PCD is 4x108.

What is the center bore of a 1993 Audi 90?

The factory center bore (hub bore) for the 1993 Audi 90 is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

Need more vehicle fitment data?

Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.

Get the Full Dataset
Confidence Level
High
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-07-08

Audi 90 By Year

1993 1994 1995

Other Audi Models

100 A3 Sportback e-tron A5 A5 Sport A6 A7 Q5 Q5 Sportback Quattro R8 RS 3 RS Q8 RS e-tron GT S4 S4 (2005.5) SQ5 SQ7 TT e-tron e-tron GT