2025 Audi A6 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Audi A6 is 5x112. It has a center bore of 66.6 mm, an offset range of 35-45, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2025 Audi A6 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2025 A6 — Year-Specific Fitment Context
The 2025 Audi A6 is in year 31 of 32 using the 5x112 pattern (1995–2026). Wheels from any 1995–2026 Audi A6 are cross-compatible with the 2025 model.
Audi A6 Bolt Pattern by Year
Looking for all generations? View the complete Audi A6 (1995–2026) Bolt Pattern & Generation Guide →
The table below shows how the A6's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x112 | 57.1 | 42 |
| 1996 | 5x112 | 57.1 | 42 |
| 1997 | 5x112 | 57.1 | 42 |
| 1998 | 5x112 | 57.1 | 42 |
| 1999 | 5x112 | 57.1 | 42 |
| 2000 | 5x112 | 57.1 | 42 |
| 2001 | 5x112 | 57.1 | 42 |
| 2002 | 5x112 | 57.1 | 42 |
| 2003 | 5x112 | 57.1 | 42 |
| 2004 | 5x112 | 57.1 | 42 |
| 2005 | 5x112 | 57.1 | 42 |
| 2006 | 5x112 | 57.1 | 42 |
| 2007 | 5x112 | 57.1 | 42 |
| 2008 | 5x112 | 57.1 | 42 |
| 2009 | 5x112 | 57.1 | 42 |
| 2010 | 5x112 | 57.1 | 42 |
| 2011 | 5x112 | 57.1 | 42 |
| 2012 | 5x112 | 57.1 | 42 |
| 2013 | 5x112 | 57.1 | 42 |
| 2014 | 5x112 | 57.1 | 42 |
| 2015 | 5x112 | 57.1 | 42 |
| 2016 | 5x112 | 57.1 | 42 |
| 2017 | 5x112 | 57.1 | 42 |
| 2018 | 5x112 | 66.6 | 30-45 |
| 2019 | 5x112 | 66.6 | 30-45 |
| 2020 | 5x112 | 66.5 | 30-45 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.6 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
| 2024 | 5x112 | 66.6 | 30-45 |
| ▸ 2025 | 5x112 | 66.6 | 35-45 |
| 2026 | 5x112 | 66.6 | 35-45 |
2025 Audi A6 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2025 Audi A6, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Bentley Continental | 66.5 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2024 Bentley Flying Spur | 66.5 mm (Exact) | 35-45mm | 14x1.5 (Ball) |
| 2019 BMW 2 Series | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 BMW 228i | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2025 BMW 230i | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2019 BMW 3 Series | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Audi A6 — Frequently Asked Questions
What is the bolt pattern for a 2025 Audi A6?
The 2025 Audi A6 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 35-45mm.
What other years of Audi A6 have the same bolt pattern as the 2025?
The Audi A6 uses the 5x112 pattern from 1995 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2025 Audi A6?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2025 Audi?
The 2025 A6 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2025 Audi A6?
The factory center bore (hub bore) for the 2025 Audi A6 is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 66.6mm center bore important for the 2025 A6?
The 66.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →