2008 Audi Q7 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Audi Q7, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 55 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 Q7 — Year-Specific Fitment Context
The 2008 Audi Q7 is in year 2 of 9 using the 5x130 pattern (2007–2015). Wheels from any 2007–2015 Audi Q7 are cross-compatible with the 2008 model. Across its full production run (2007–2024), the Q7 has also used: 5x112.
Audi Q7 Bolt Pattern by Year
The table below shows how the Q7's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 5x130 | 71.6 | 55 |
| ▸ 2008 | 5x130 | 71.6 | 55 |
| 2009 | 5x130 | 71.6 | 55 |
| 2010 | 5x130 | 71.6 | 55 |
| 2011 | 5x130 | 71.6 | 55 |
| 2012 | 5x130 | 71.6 | 55 |
| 2013 | 5x130 | 71.6 | 55 |
| 2014 | 5x130 | 71.6 | 55 |
| 2015 | 5x130 | 71.6 | 55 |
| 2017 | 5x112 | 66.5 | 30 |
| 2018 | 5x112 | 66.5 | 30 |
| 2019 | 5x112 | 66.5 | 30 |
| 2020 | 5x112 | 66.5 | 30 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.5 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
| 2024 | 5x112 | 66.5 | 30-45 |
5x130 Pattern Context
This bolt pattern appears on 208 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x130:
Expert Buying Guide for 2008 Audi Q7
For your 2008 Audi Q7, the correct bolt pattern is 5x130 with a center bore of 71.6mm. Aftermarket wheels must be hub-centric; use hub-centric rings if the bore is larger to prevent vibration. The recommended offset is 55mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (ball seat for OEM, cone seat for many aftermarket wheels). Improper lug nuts can lead to wheel loosening. Verify fitment with a test fit before final installation.
Historical Fitment Data Reference
In our dataset, Audi Q7 appears from 2007 to 2024 (17 model years). Across model years, this model appears with 2 bolt patterns (5x112, 5x130).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on wheel bearings.
- ✅ For winter wheels, consider downsizing to 18" or 19" diameter to allow for taller sidewall tires and better snow traction.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Audi Q7 — Frequently Asked Questions
What is the bolt pattern for a 2008 Audi Q7?
The 2008 Audi Q7 uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 55mm.
What other years of Audi Q7 have the same bolt pattern as the 2008?
The Audi Q7 uses the 5x130 pattern from 2007 through 2015. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the factory wheel offset for a 2008 Audi Q7?
The OEM offset for the 2008 Q7 is typically around 55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2008 Audi Q7?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Q7, the PCD is 5x130.
What does 55mm offset mean for the 2008 Q7?
An offset of 55mm means the wheel's mounting surface is 55mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Audi.
How do I measure the bolt pattern on my 2008 Audi?
The 2008 Q7 uses a 5x130 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset