2014 Audi Q7 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Audi Q7, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 55 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2014 Q7 — Year-Specific Fitment Context
The 2014 Audi Q7 is in year 8 of 9 using the 5x130 pattern (2007–2015). Wheels from any 2007–2015 Audi Q7 are cross-compatible with the 2014 model. Across its full production run (2007–2024), the Q7 has also used: 5x112.
Audi Q7 Bolt Pattern by Year
The table below shows how the Q7's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 5x130 | 71.6 | 55 |
| 2008 | 5x130 | 71.6 | 55 |
| 2009 | 5x130 | 71.6 | 55 |
| 2010 | 5x130 | 71.6 | 55 |
| 2011 | 5x130 | 71.6 | 55 |
| 2012 | 5x130 | 71.6 | 55 |
| 2013 | 5x130 | 71.6 | 55 |
| ▸ 2014 | 5x130 | 71.6 | 55 |
| 2015 | 5x130 | 71.6 | 55 |
| 2017 | 5x112 | 66.5 | 30 |
| 2018 | 5x112 | 66.5 | 30 |
| 2019 | 5x112 | 66.5 | 30 |
| 2020 | 5x112 | 66.5 | 30 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.5 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
| 2024 | 5x112 | 66.5 | 30-45 |
5x130 Pattern Context
This bolt pattern appears on 208 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x130:
Expert Buying Guide for 2014 Audi Q7
For the 2014 Audi Q7, the critical fitment specs are 5x130 bolt pattern, 71.6mm center bore, and 55mm offset. When selecting aftermarket wheels, ensure the center bore matches exactly or use hub-centric rings to prevent vibrations. The offset is sensitive; staying within 50-60mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (ball seat for OEM, cone seat for many aftermarket wheels). Improper lug nuts can cause wheel loosening. Re-torque after 50-100 miles. Note: 2007-2015 Q7 wheels are direct fit; later models use 5x112, requiring adapters.
Historical Fitment Data Reference
In our dataset, Audi Q7 appears from 2007 to 2024 (17 model years). Across model years, this model appears with 2 bolt patterns (5x112, 5x130).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 Nm (103 ft-lbs) after 50-100 miles of driving.
- ✅ Avoid using wheels with a center bore larger than 71.6mm without hub-centric rings to prevent vibration.
- ✅ Check that aftermarket wheels have sufficient brake caliper clearance; the Q7 has large brakes.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Audi Q7 — Frequently Asked Questions
What is the bolt pattern for a 2014 Audi Q7?
The 2014 Audi Q7 uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 55mm.
What other years of Audi Q7 have the same bolt pattern as the 2014?
The Audi Q7 uses the 5x130 pattern from 2007 through 2015. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2014 Audi Q7?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2014 Audi Q7?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 Q7, the PCD is 5x130.
How do I measure the bolt pattern on my 2014 Audi?
The 2014 Q7 uses a 5x130 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 71.6mm center bore important for the 2014 Q7?
The 71.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset