2017 Audi R8 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Audi R8, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2017 R8 — Year-Specific Fitment Context
The 2017 Audi R8 is in year 10 of 16 using the 5x112 pattern (2008–2023). Wheels from any 2008–2023 Audi R8 are cross-compatible with the 2017 model.
Audi R8 Bolt Pattern by Year
The table below shows how the R8's wheel specifications have changed over the years. The 2017 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2008 | 5x112 | 57.1 | 42 |
| 2009 | 5x112 | 57.1 | 42 |
| 2010 | 5x112 | 57.1 | 42 |
| 2011 | 5x112 | 57.1 | 42 |
| 2012 | 5x112 | 57.1 | 42 |
| 2014 | 5x112 | 57.1 | 42 |
| 2015 | 5x112 | 57.1 | 42 |
| ▸ 2017 | 5x112 | 57.1 | 42 |
| 2018 | 5x112 | 66.5 | 30-45 |
| 2020 | 5x112 | 66.5 | 30-45 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.5 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2017 Audi R8
For your 2017 Audi R8, the 5x112 bolt pattern is shared across 2008–2023 models, ensuring cross-compatibility. However, the 57.1mm center bore is critical: aftermarket wheels with a larger bore require hub-centric rings to prevent vibrations and ensure load is on the hub, not the lugs. Offset is sensitive; the factory spec is 42mm, but a range of 35–50mm is acceptable depending on width and tire size. Deviating too far can cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seating type—Audi uses ball seats; using conical or acorn seats can damage wheels. Re-torque after 50–100 miles of driving.
Historical Fitment Data Reference
In our dataset, Audi R8 appears from 2008 to 2023 (13 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 87.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 ft-lb after 50–100 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, always verify hub bore and use hub-centric rings if the bore exceeds 57.1mm.
- ✅ Avoid spacers unless necessary; if used, ensure they are hub-centric and do not alter offset beyond 35–50mm range.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Audi R8 — Frequently Asked Questions
What is the bolt pattern for a 2017 Audi R8?
The 2017 Audi R8 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 42mm.
What other years of Audi R8 have the same bolt pattern as the 2017?
The Audi R8 uses the 5x112 pattern from 2008 through 2023. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2017 Audi R8?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2017 Audi R8s use lug bolts or lug nuts?
The 2017 R8 requires B 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2017 Audi R8?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2017 R8, the PCD is 5x112.
What is the factory wheel offset for a 2017 Audi R8?
The OEM offset for the 2017 R8 is typically around 42mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset