2026 Audi RS 6 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Audi RS 6 is 5x112. It has a center bore of 66.6 mm, an offset range of 30-45, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2026 Audi RS 6 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 30-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
2026 RS 6 — Year-Specific Fitment Context
The 2026 model year is the final year of the Audi RS 6's 5x112 bolt pattern run (since 2003). Wheels from any 2003–2026 Audi RS 6 are cross-compatible with the 2026 model.
Audi RS 6 Bolt Pattern by Year
Looking for all generations? View the complete Audi RS 6 (2003–2026) Bolt Pattern & Generation Guide →
The table below shows how the RS 6's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Audi RS 6 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 Audi RS 6, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 BMW 550e | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2019 BMW 6 Series | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2017 BMW 7 Series | 66.5 mm (Exact) | 30 front 40 rear | B 14x1.25 (Cone) |
| 2025 BMW 740i | 66.6 mm (Exact) | 25-35 | 14x1.25 (Cone) |
| 2025 BMW 750e | 66.6 mm (Exact) | 25-35 | 14x1.25 (Cone) |
| 2025 BMW 760i | 66.6 mm (Exact) | 25-35 | 14x1.25 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Audi RS 6 — Frequently Asked Questions
What is the bolt pattern for a 2026 Audi RS 6?
The 2026 Audi RS 6 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-45mm.
What other years of Audi RS 6 have the same bolt pattern as the 2026?
The Audi RS 6 uses the 5x112 pattern from 2003 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What lug nut size does the 2026 Audi RS 6 use?
The 2026 Audi RS 6 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2026 Audi RS 6?
The OEM offset for the 2026 RS 6 is typically around 30-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2026 Audi RS 6?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-45mm, and a center bore of at least 66.6mm (using hub rings if larger).
Do 2026 Audi RS 6s use lug bolts or lug nuts?
The 2026 RS 6 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →