2024 Audi RS 6 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Audi RS 6, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.5 mm |
| Offset (ET) | 30-45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2024 RS 6 — Year-Specific Fitment Context
The 2024 model year is the final year of the Audi RS 6's 5x112 bolt pattern run (since 2003). Wheels from any 2003–2024 Audi RS 6 are cross-compatible with the 2024 model.
Audi RS 6 Bolt Pattern by Year
The table below shows how the RS 6's wheel specifications have changed over the years. The 2024 model year is highlighted.
Fitment Notes
The 2024 Audi RS 6 has a bolt pattern of 5x112.
This means it is a 5 lug pattern with a circle diameter of 112mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Audi RS 6 appears from 2003 to 2024 (5 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 90.0 mm
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
2024 Audi RS 6 — Frequently Asked Questions
What is the bolt pattern for a 2024 Audi RS 6?
The 2024 Audi RS 6 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 30-45mm.
What other years of Audi RS 6 have the same bolt pattern as the 2024?
The Audi RS 6 uses the 5x112 pattern from 2003 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What is the factory wheel offset for a 2024 Audi RS 6?
The OEM offset for the 2024 RS 6 is typically around 30-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2024 Audi?
The 2024 RS 6 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Audi fit my 2024 RS 6?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.5mm.
Can I use spacers on my 2024 Audi RS 6?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.5mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Audi RS 6 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2003-2024 (5 model years).
- Observed bolt-pattern variants: 1 (5x112).
- Observed total offset span across years: 90.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2024 Audi RS 6, please report it via our About page contact so we can verify and update this record.